Found out from MT you have to buy a custom frequency license for each to use it.
John Buwa Michiana Wireless > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > Behalf Of Randy Cosby > Sent: Friday, August 29, 2008 6:46 PM > To: [EMAIL PROTECTED]; WISPA General List > Subject: Re: [WISPA] XR3 > > What did the sticker say with the card? Mine said to bump it 2.0GHz, so > 5.540 = 3.540. That worked for me. Following the instructions in the > forum did not. > > > > [EMAIL PROTECTED] wrote: > > Anyone using the XR3/ 20mhz spacing on the list? The conversion table > says > > Channel B real 5770Mhz equals 3663 Mhz but 5770 is not selectable unless > the > > card is in 5 or 10 mhz channels? What gives? > > > > John Buwa > > Michiana Wireless > > > > > > > >> -----Original Message----- > >> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > >> Behalf Of Gino Villarini > >> Sent: Friday, August 29, 2008 4:30 PM > >> To: WISPA General List > >> Subject: [WISPA] Redline AN100 Latest software? > >> > >> I have 1.2.24 on my AN100 > >> > >> Gino A. Villarini > >> [EMAIL PROTECTED] > >> Aeronet Wireless Broadband Corp. > >> tel 787.273.4143 fax 787.273.4145 > >> > >> > >> > >> ----------------------------------------------------------------------- > --- > >> ------ > >> WISPA Wants You! Join today! > >> http://signup.wispa.org/ > >> ----------------------------------------------------------------------- > --- > >> ------ > >> > >> WISPA Wireless List: wireless@wispa.org > >> > >> Subscribe/Unsubscribe: > >> http://lists.wispa.org/mailman/listinfo/wireless > >> > >> Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > > > > ------------------------------------------------------------------------ > -------- > > WISPA Wants You! Join today! > > http://signup.wispa.org/ > > ------------------------------------------------------------------------ > -------- > > > > WISPA Wireless List: wireless@wispa.org > > > > Subscribe/Unsubscribe: > > http://lists.wispa.org/mailman/listinfo/wireless > > > > Archives: http://lists.wispa.org/pipermail/wireless/ > > -- > Randy Cosby > Vice President > InfoWest, Inc > > office: 435-773-6071 > > > > -------------------------------------------------------------------------- > ------ > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------- > ------ > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/