Hi, It's a 2 hour drive (each way) and requires taking the link down (again). I have XR5 cards sitting on my desk... but if I'm only going to see 1db of improvement, it's not worth 5 hours of time. ;) Travis Microserv D. Ryan Spott wrote: You could just toss the cards in there and do a quick configure. $216 for the parts should be easy to show on the books. :)ryan Travis Johnson wrote:Hi, Can anyone provide any real-world experience where they replaced SR5 cards with XR5 cards on a point to point link? We have a 15 mile shot (using MT) that is just _barely_ line of site enough to establish a link. I am just wondering how much increase in signal we would see by switching cards? thanks, Travis Microserv -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/-------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ |
-------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/