I have two water towers that will need 4 to 5 antenna mounts. The water towers are both the same. They are approximately 120' with a climbing tube and a bulb at the top. There are no side rails. The hatch opens to the bulb. How do you attach antennas??? Is welding standoffs the best practice? Any ideas on basic costs?
Here is a pic of one of the towers: http://stlbroadband.com/h20.html Also this was a method mentioned on another thread: http://www.metal-cable.com/page13.html These guys are nice but $3k apiece. I am thinking that if you went that route that you could get three for each tower and ad a mounting pipe between each creating a triangle and mount to that. I am not sure how long they would maintain their power for this application, but if you had to move your network these come along versus a welded situation. Thanks, Victoria -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
