I thought I would post this for those who are using RedMax gear. We've been beating our heads trying to figure out why suddenly two sectors have gone ballistic with CRC errors on the downlink. We replaced the cable on one and were about to on the other until we found that if we rebooted one of the SUs the CRC errors went away on the sector controller downlink. This made sense as when we rebooted the Sector Controller the uplink CRC errors went away. Evidently we had a couple of strange moments (high winds? tower work?) that may have caused errors, and then the CRC errors were cached so that every time we rebooted the SC, the uplink crc went away, but the downlink kept showing back up.
Last night we rebooted all the SUs and so far our Downlink CRC errors have zeroed out like they were to begin with. Just thought I would save someone a headache in the future -- John M. McDowell Boonlink Communications 307 Grand Ave NW Fort Payne, AL 35967 256.844.9932 j...@boonlink.com www.boonlink.com This message contains information which may be confidential and privileged. Unless you are the addressee (or authorized to receive for the addressee), you may not use, copy, re-transmit, or disclose to anyone the message or any information contained in the message. If you have received the message in error, please advise the sender by reply e-mail j...@boonlink.com, and delete the message. E-mail communication is highly susceptible to spoofing, spamming, and other tampering, some of which may be harmful to your computer. If you are concerned about the authenticity of the message or the source, please contact the sender directly. -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/