Thanks!

Greg
On Jan 27, 2009, at 10:00 AM, L. Aaron Kaplan wrote:

>
> On Jan 26, 2009, at 11:15 PM, os10ru...@gmail.com wrote:
>
>> Is anyone using the NS2 or NS5 where the AP's are a mesh network, or
>> is everyone using AP's with backhauls? I want to try a mesh network
>> with the NS2. It looks like the firmware options are open-mesh or
>> something proprietary such as http://kalpeshwireless.com/ 
>> overview.htm.
>> I've contacted Kalpesh to see if the firmware is available separately
>> and they haven't responded.
>
> The wonderful people at Funkfeuer Graz (http://funkfeuer.at) have
> ported OLSRd to the NS2 and NS5.
> It was apparently very easy to compile it with the ubiquiti supplied
> SDK. I have not done so myself yet, but I trust their judgement.
>
> Here is the howto:
> https://wiki.graz.funkfeuer.at/UbntStations
>
>
>>
>>
>> Greg
>>
>> On Jan 26, 2009, at 5:01 PM, David Hulsebus wrote:
>>
>>> We have about fifty NS5's in place. No more than 10 on any AP and  
>>> all
>>> using the NS5 as the AP. The only issue I have had appears to be
>>> firmware related on the last group of 10 units we got at the end of
>>> the
>>> year. Carl at Steakwave and Mike Ford, at Ubiquiti, took care of the
>>> issue in a few minutes, with a phone call, a discussion of the
>>> issues,
>>> and a follow up e-mail from Mike.
>>>
>>> I've had one RMA direct to Ubiquiti a few months ago for an ethernet
>>> port issue.
>>>
>>> We run EWMA and normal 802 traffic, also 5MHz channel width. Nothing
>>> else special. I have a router behind the AP's so they are a bridge.
>>>
>>> Dave
>>>
>>> e...@wisp-router.com wrote:
>>>> That is where you should RMA things to first. As well first place
>>>> to get technical support after checking on their forums. Ourselves
>>>> we have a dedicated support department to handle your questions.
>>>> Just have invoice number or serial number handy when calling to
>>>> speed up support questions.
>>>>
>>>> Eje Gustafsson
>>>> CTO
>>>> WISP-Router, Inc.
>>>> Sent via BlackBerry from T-Mobile
>>>>
>>>> -----Original Message-----
>>>> From: RickG <rgunder...@gmail.com>
>>>>
>>>> Date: Mon, 26 Jan 2009 10:40:13
>>>> To: WISPA General List<wireless@wispa.org>
>>>> Subject: Re: [WISPA] Nanostation support, tips, etc.
>>>>
>>>>
>>>> RMA to Ubiquiti? Wouldnt you RMA to the distributor you purchased
>>>> it from?
>>>> -RickG
>>>>
>>>> On Mon, Jan 26, 2009 at 1:20 AM, rabbtux rabbtux
>>>> <rabb...@gmail.com> wrote:
>>>>
>>>>> Anyone ever rma a Nanostation?  Ubiquity good to work with?
>>>>>
>>>>>
>>>>> On 1/25/09, Josh Luthman <j...@imaginenetworksllc.com> wrote:
>>>>>
>>>>>> Just remember to use Eje's POE calculator first! :)
>>>>>>
>>>>>> On 1/26/09, Jerry Richardson <jrichard...@aircloud.com> wrote:
>>>>>>
>>>>>>> Pretty happy with the dozen or so we have out there. No issues
>>>>>>> at all
>>>>>>> other than one on a 350' run of cat5 that needed at 24V power
>>>>>>> supply to
>>>>>>> be stable.
>>>>>>>
>>>>>>> Forrest pulled one apart and said the power supply max is around
>>>>>>> 18V so
>>>>>>> use caution on overpowering.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> __________________________________
>>>>>>> Jerry Richardson
>>>>>>> airCloud Communications
>>>>>>>
>>>>>>>
>>>>>>> ________________________________
>>>>>>>
>>>>>>> From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org
>>>>>>> ] On
>>>>>>> Behalf Of Blair Davis
>>>>>>> Sent: Sunday, January 25, 2009 8:04 PM
>>>>>>> To: WISPA General List
>>>>>>> Subject: Re: [WISPA] Nanostation support, tips, etc.
>>>>>>>
>>>>>>>
>>>>>>> Yes, it does.  runs over 200ft have been unreliable with the
>>>>>>> 12VDC
>>>>>>> supply.  Needing power cycling 2-3 times a day.
>>>>>>>
>>>>>>> Josh Luthman wrote:
>>>>>>>
>>>>>>>   I don't believe you'll lose voltage over a 150 ft line when
>>>>>>> you're
>>>>>>>   only pulling an amp or two, but I could be wrong.
>>>>>>>
>>>>>>>   Have you experienced something that proves me wrong?
>>>>>>>
>>>>>>>   On 1/25/09, Blair Davis <the...@wmwisp.net>
>>>>>>> <mailto:the...@wmwisp.net>  wrote:
>>>>>>>
>>>>>>>
>>>>>>>           Use a hose clamp, instead of the included zip ties, to
>>>>>>> mount outdoors.
>>>>>>>
>>>>>>>           If network cable is longer than 150ft, use an 18VDC
>>>>>>> power supply instead of
>>>>>>>           the included 12VDC supply.
>>>>>>>
>>>>>>>           If talking to an older  'B' only AP, set the radios to
>>>>>>> 'B' only mode.
>>>>>>>
>>>>>>>           Adaptive antenna mode is not worth using.
>>>>>>>
>>>>>>>           Make sure to update units to 3.x.x firmware.  Many are
>>>>>>> still shipping with
>>>>>>>           2.1.x.
>>>>>>>
>>>>>>>           All this is for the NS2 units.  I've never used the
>>>>>>> NS5's.
>>>>>>>
>>>>>>>           Good support, via their fourm.
>>>>>>>
>>>>>>>           Haven't had and DOA's or needed to RMA any of these
>>>>>>> yet.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>           rabbtux rabbtux wrote:
>>>>>>>
>>>>>>>
>>>>>>>                   We are considering using these units for 2
>>>>>>> and 5
>>>>>>> GHz Cpe.  What is
>>>>>>>                   your experience with ubiquiti support, failure
>>>>>>> rates, and any
>>>>>>>                   deployment tips?  I sure like what we see in
>>>>>>> our
>>>>>>> evaluation.
>>>>>>>
>>>>>>>                   Thanks in advance,
>>>>>>>                   Marshall
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --------------------------------------------------------------------------------
>>>>>>> WISPA Wants You! Join today!
>>>>>>> http://signup.wispa.org/
>>>>>>> --------------------------------------------------------------------------------
>>>>>>>
>>>>>>> WISPA Wireless List: wireless@wispa.org
>>>>>>>
>>>>>>> Subscribe/Unsubscribe:
>>>>>>> http://lists.wispa.org/mailman/listinfo/wireless
>>>>>>>
>>>>>>> Archives: http://lists.wispa.org/pipermail/wireless/
>>>>>>>
>>>>>>>
>>>>>> --
>>>>>> Josh Luthman
>>>>>> Office: 937-552-2340
>>>>>> Direct: 937-552-2343
>>>>>> 1100 Wayne St
>>>>>> Suite 1337
>>>>>> Troy, OH 45373
>>>>>>
>>>>>> Those who don't understand UNIX are condemned to reinvent it,
>>>>>> poorly.
>>>>>> --- Henry Spencer
>>>>>>
>>>>>>
>>>>>> --------------------------------------------------------------------------------
>>>>>> WISPA Wants You! Join today!
>>>>>> http://signup.wispa.org/
>>>>>> --------------------------------------------------------------------------------
>>>>>>
>>>>>> WISPA Wireless List: wireless@wispa.org
>>>>>>
>>>>>> Subscribe/Unsubscribe:
>>>>>> http://lists.wispa.org/mailman/listinfo/wireless
>>>>>>
>>>>>> Archives: http://lists.wispa.org/pipermail/wireless/
>>>>>>
>>>>>>
>>>>> --
>>>>> Sent from my mobile device
>>>>>
>>>>>
>>>>> --------------------------------------------------------------------------------
>>>>> WISPA Wants You! Join today!
>>>>> http://signup.wispa.org/
>>>>> --------------------------------------------------------------------------------
>>>>>
>>>>> WISPA Wireless List: wireless@wispa.org
>>>>>
>>>>> Subscribe/Unsubscribe:
>>>>> http://lists.wispa.org/mailman/listinfo/wireless
>>>>>
>>>>> Archives: http://lists.wispa.org/pipermail/wireless/
>>>>>
>>>>>
>>>>
>>>>
>>>> --------------------------------------------------------------------------------
>>>> WISPA Wants You! Join today!
>>>> http://signup.wispa.org/
>>>> --------------------------------------------------------------------------------
>>>>
>>>> WISPA Wireless List: wireless@wispa.org
>>>>
>>>> Subscribe/Unsubscribe:
>>>> http://lists.wispa.org/mailman/listinfo/wireless
>>>>
>>>> Archives: http://lists.wispa.org/pipermail/wireless/
>>>>
>>>>
>>>> --------------------------------------------------------------------------------
>>>> WISPA Wants You! Join today!
>>>> http://signup.wispa.org/
>>>> --------------------------------------------------------------------------------
>>>>
>>>> WISPA Wireless List: wireless@wispa.org
>>>>
>>>> Subscribe/Unsubscribe:
>>>> http://lists.wispa.org/mailman/listinfo/wireless
>>>>
>>>> Archives: http://lists.wispa.org/pipermail/wireless/
>>>>
>>>
>>>
>>> --------------------------------------------------------------------------------
>>> WISPA Wants You! Join today!
>>> http://signup.wispa.org/
>>> --------------------------------------------------------------------------------
>>>
>>> WISPA Wireless List: wireless@wispa.org
>>>
>>> Subscribe/Unsubscribe:
>>> http://lists.wispa.org/mailman/listinfo/wireless
>>>
>>> Archives: http://lists.wispa.org/pipermail/wireless/
>>
>>
>>
>> --------------------------------------------------------------------------------
>> WISPA Wants You! Join today!
>> http://signup.wispa.org/
>> --------------------------------------------------------------------------------
>>
>> WISPA Wireless List: wireless@wispa.org
>>
>> Subscribe/Unsubscribe:
>> http://lists.wispa.org/mailman/listinfo/wireless
>>
>> Archives: http://lists.wispa.org/pipermail/wireless/
>>
>
>
>
> --------------------------------------------------------------------------------
> WISPA Wants You! Join today!
> http://signup.wispa.org/
> --------------------------------------------------------------------------------
>
> WISPA Wireless List: wireless@wispa.org
>
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
>
> Archives: http://lists.wispa.org/pipermail/wireless/



--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to