Re: [WISPA] Berber carpet

Tue, 17 Feb 2009 05:13:07 -0800

Right.  You don't was to be the cause of a "runner" the next time they vacuum. 

Brian

John Scrivner wrote: 
Carpet has a grain. You cut a slit a few inches long along the grain. You
can pull the carpet up over the bit, run the bit slowly and prevent creating
runs in the carpet.
Scriv


On Mon, Feb 16, 2009 at 8:26 PM, John J. Thomas <[email protected]> wrote:

  
Is there any reason you don't just cut an X in the carpter and then trim
it?

John

    
-----Original Message-----
From: John Scrivner [mailto:[email protected]]
Sent: Saturday, February 14, 2009 08:18 AM
To: 'WISPA General List'
Subject: Re: [WISPA] Berber carpet

You need to use a sharp razor knife to cut a slit about 3 inches long
      
along
    
the grain of the carpet. Then hold the carpet to the side as you drill.
Scriv


On Sat, Feb 14, 2009 at 10:09 AM, RickG <[email protected]> wrote:

      
How do you guys drill holes through berber carpet withour pulling the
threads?
I have the "cutting tool" but thread still grab onto the drill bit.
I've thought about finding a metal tube to put the drill into so it
doesnt catch the carpet.
Thoughts?
-RickG




        
--------------------------------------------------------------------------------
    
WISPA Wants You! Join today!
http://signup.wispa.org/


        
--------------------------------------------------------------------------------
    
WISPA Wireless List: [email protected]

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

        
      
--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
      
--------------------------------------------------------------------------------

WISPA Wireless List: [email protected]

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

      



--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/

--------------------------------------------------------------------------------

WISPA Wireless List: [email protected]

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

    


--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: [email protected]

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

  

--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: [email protected]

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to