The antennas I have on water towers are attached by "beam clamps". I will use a 1 1/2 piece of EMT pipe, drill a hole through the pipe and connect the beam clamp to it with a bolt long enough to go through the pipe. this way nothing is welded or drilled into the water tower. If for some reason we have to remove out gear, there is nothing that has to be repaired by us or the water company.
Hope this helps some. --- On Wed, 2/18/09, Ron Wallace <[email protected]> wrote: > From: Ron Wallace <[email protected]> > Subject: [WISPA] (no subject) > To: "Wispa" <[email protected]>, [email protected], "WISPA" > <[email protected]> > Date: Wednesday, February 18, 2009, 5:57 AM > To All, > > Over past I have seen antenna mounts on a number of H20 > towers - Tank type - constructed by WISP's. Does anyone > have pictures? Drawings, etc. I have a meeting with a local > township to place our facilities on their water tower. And I > need to write a proposal for the board. > > If you all could help me, yet again, that would be great. > Thank you in advance. > > Ron Wallace > Hahnron, Inc. > 220 S. Jackson Dt. > Addison, MI 49220 > > Phone: (517)547-8410 > Mobile: (517)270-2410 > e-mail: [email protected] > [email protected] > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
