One think I would look at is: Are the connector center pins crimped or are they soldered? Temperature has a way on contracting and expanding metal, darned all the luck. But this has happened to me in the past.
--- On Tue, 3/3/09, Blair Davis <[email protected]> wrote: > From: Blair Davis <[email protected]> > Subject: [WISPA] Link problem > To: "WISPA General List" <[email protected]> > Date: Tuesday, March 3, 2009, 12:58 PM > <div id=yiv1672673950><!DOCTYPE html PUBLIC > "-//W3C//DTD HTML 4.01 Transitional//EN"> > <html> > <head> > </head> > > Hi all...<br> > <br> > All of a sudden, a PtP link that has been stable, -79 rssi > or so > bi-directional has become very asymmetric.<br> > <br> > I now get -79 rssi/-98 noise floor at one end and -88 > rssi/-95 noise > floor at the other...<br> > <br> > Link is a pair of cm9's, 20db grids, 5.180GHz, range > 1km, clear LOS. > 3ft lmr-400 radio to antenna at one end, 60ft lmr-400 radio > to antenna > at other end.<br> > <br> > Any ideas? <br> > <br> > Clear and cold here, 27F. Dry since last > Thursday...<br> > <br> > Thanks.<br> > <br> > Blair<br> > <br> > <br> > > </html> > </div> > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
