Hi, I would like to set up 2 antennas (East and West more or less) but will not get more than 30 subs between the 2. I would like to connect both antennas to one AP. Normally, I would not even dream of doing this. However this is a small valey with low interferance. And all the subs will be very clse, peobably less than a quarter mile from the AP.
I am planning to use 900MHz for this. So I guess this would be a device that would connect to the AP with one COAX and then connect to each antenna with a COAX. So, 3 N connectors. Has any of you done this, did you have success, and what is the device called, and where would I get it? Thank you, Adam -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/