Didn't mean to reply to my post, but I forgot to add that I also found P2P software running on the routers we had issues with.
Eric -----Original Message----- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Eric Rogers Sent: Wednesday, June 10, 2009 12:53 PM To: WISPA General List Subject: Re: [WISPA] Latest Tranzeo Firmware = Broken NAT ??? We have been seeing a couple issues with old Linksys WRT54Gs passing private IP addresses down the PPPoE tunnel. It is almost like the NAT table gets full, or there isn't enough memory to keep it all, then gets corrupt. I wonder if this is similar to what the Tranzeo's are doing. Eric -----Original Message----- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Kurt Fankhauser Sent: Wednesday, June 10, 2009 9:19 AM To: 'WISPA General List' Subject: Re: [WISPA] Latest Tranzeo Firmware = Broken NAT ??? Well, this definetly has something to do with having P2P installed on any machine behind the CPQ router because I can trigger this 100% of the time by launching limewire. Kurt Fankhauser WAVELINC P.O. Box 126 Bucyrus, OH 44820 419-562-6405 www.wavelinc.com -----Original Message----- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Steve Barnes Sent: Wednesday, June 10, 2009 9:16 AM To: WISPA General List Subject: Re: [WISPA] Latest Tranzeo Firmware = Broken NAT ??? So we now have WISPs with both StarOS and Mtik AP's that are having issues with the Router mode of CPQ/SL2. Wonder what Tranzeo would say about this? Steve Barnes RCWiFi Wireless Internet Service From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Steve Smith Sent: Tuesday, June 09, 2009 6:01 PM To: WISPA General List Subject: Re: [WISPA] Latest Tranzeo Firmware = Broken NAT ??? I do. I will drop it to you offlist. D. Ryan Spott wrote: Do you have any ethreal data you can share? ryan Steve Smith wrote: In our case we are using staros APs. We like to have the CPE set to router mode so we don't have to deal with any of the client equipment on their side of our unit at their place. That way we don't care if they change out a piece of equipment. We are having no problem with any Tranzeo equipment that is set to bridge mode. We love the Tranzeo CPQs. Our problems are when the CPQs are in router mode. There is a definite problem that we can replicate 100% of the time. We have eliminated all of the causes of the problem with the exception of the Tranzeo CPQ. All units have 4.0.2 and we do not believe the problem is with an upgrade in the firmware because we can replicate the problem in version 3.6.7 as well. I just moved one client today that was in router mode back to bridge mode because they couldn't do their UPS shipping until we did. Apparently, we may need to move all of them to bridge mode but with hundreds of units out there I really don't like that idea. steve D. Ryan Spott wrote: Why you would route AT the AP boggles my mind... Routing Before the AP is the way to go. Why add additional load on an AP when it should be working on sending and receiving wireless data. ryan Rick Kunze wrote: I've got about 50 or 60 CPQ's and SL2's out there, as well as a dozen or so 6000's, some for up to 4 or 5 years. I've never had a single problem with any of them failing to pass traffic as mentioned in the thread. I just upgraded one small town to 4.0.2, a couple 6000's and a couple dozen CPE's in router/NAT mode. No calls from any customers . . . everything seems normal. IMO, the Tranzeo stuff has been fine. All AP's however are bridged in my case. Rk ------------------------------------------------------------------------ ---- ---- WISPA Wants You! Join today! http://signup.wispa.org/ ------------------------------------------------------------------------ ---- ---- WISPA Wireless List: wireless@wispa.org<mailto:wireless@wispa.org> Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ ------------------------------------------------------------------------ ---- ---- WISPA Wants You! Join today! http://signup.wispa.org/ ------------------------------------------------------------------------ ---- ---- WISPA Wireless List: wireless@wispa.org<mailto:wireless@wispa.org> Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- Steve Smith, Chase 3000, PO Box 760, 554 Kramer St., Imperial, NE 69033, 308 882 3000 office, 308 883 3001 cell ------------------------------------------------------------------------ ------------------------------------------------------------------------ ---- ---- WISPA Wants You! Join today! http://signup.wispa.org/ ------------------------------------------------------------------------ ---- ---- WISPA Wireless List: wireless@wispa.org<mailto:wireless@wispa.org> Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ ------------------------------------------------------------------------ ---- ---- WISPA Wants You! Join today! http://signup.wispa.org/ ------------------------------------------------------------------------ ---- ---- WISPA Wireless List: wireless@wispa.org<mailto:wireless@wispa.org> Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- Steve Smith, Chase 3000, PO Box 760, 554 Kramer St., Imperial, NE 69033, 308 882 3000 office, 308 883 3001 cell ------------------------------------------------------------------------ ---- ---- WISPA Wants You! Join today! http://signup.wispa.org/ ------------------------------------------------------------------------ ---- ---- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ ------------------------------------------------------------------------ -------- WISPA Wants You! Join today! http://signup.wispa.org/ ------------------------------------------------------------------------ -------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.339 / Virus Database: 270.12.60/2166 - Release Date: 06/09/09 18:08:00 ------------------------------------------------------------------------ -------- WISPA Wants You! Join today! http://signup.wispa.org/ ------------------------------------------------------------------------ -------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.339 / Virus Database: 270.12.60/2166 - Release Date: 06/10/09 05:52:00 -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/