I've got several outdoor Wi-Fi radios that I would like to configure in a PtP configuration on multiple 802.11a channels.
My question to the list is, "Can I use LACP on each end (via a network switch) to aggregate those PtP connections into one virtual connection?" e.g. http://www.cisco.com/en/US/tech/tk389/tk213/technologies_configuration_example09186a0080094470.shtml So, instead of using ethernet to each switch, I'm connecting an ethernet cable from my switch into the 100 Mbps LIM of the radio node, creating a PtP link across an area, then coming out that other radio's 100 Mbps LIM via ethernet into another LACP-friendly switch. So, on each port, there is something like... switch->ethernet->radio-> 5 GHz PtP link->radio->ethernet->switch Any feedback on this? -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
