I have a 10'red balloon that we used to float a few years back for tower 
siting purposes.

I wasn't able get too much equipment on that balloon and expect it to float.

I tried it with an old map2 with rubber ducky and cat5 as the line and 
the balloon had a hard time rising.

The calculation is 1 gram of weight to 1 liter of helium.

You have to take into consideration the weight of the balloon and the 
weight of the rope. Cat is heavier than tether line.

Good news is, a set of binoculars lets you at least spot it which is 
what we ended up doing.

George






Robert West wrote:
> I used to use those 7 ft. helium balloons as advertising when I had another
> business years ago.  They had pretty good lift!  Sounds like a good idea.
> Not sure how you could test a full speed link with a dish but an Omni could
> be put on it with a Mikrotik 411 board.  Then you could use cat5 riser cable
> to tether it.  At least you could see a signal that way.  
> 
> -----Original Message-----
> From: [email protected] [mailto:[email protected]] On
> Behalf Of Aaron D. Osgood
> Sent: Friday, July 17, 2009 9:51 AM
> To: WISPA General List
> Subject: Re: [WISPA] Verify Link Analysis
> 
> Balloon
> ------Original Message------
> From: George Rogato
> Sender: [email protected]
> To: WISPA General List
> ReplyTo: WISPA General List
> Subject: Re: [WISPA] Verify Link Analysis
> Sent: Jul 17, 2009 09:30
> 
> 
> 
> Scott Reed wrote:
>> Does anyone have a easy, inexpensive way to test a link before a tower 
>> is built?  RadioMobile link analysis says I can get backhaul to the 
>> potential location, but in my area trees are always a challenge.  I 
>> would like to test it now, while the trees are full, before I commit the 
>> money to build a tower.  I am looking at a 120' ANWireless tower, so I 
>> need to be able to test at 100+ feet.
>>
> Scott Reed
> Sr. Systems Engineer
> GAB Midwest
> 1-800-363-1544 x4000
> Cell: 260-273-7239
> 
> 
> Scott
> 
> I noticed in your signature that it says GAB Midwest.
> 
> Who is GAB Midwest?
> 
> Thanks
> George
> 
> 
> 
> ----------------------------------------------------------------------------
> ----
> WISPA Wants You! Join today!
> http://signup.wispa.org/
> ----------------------------------------------------------------------------
> ----
>  
> WISPA Wireless List: [email protected]
> 
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
> 
> Archives: http://lists.wispa.org/pipermail/wireless/
> 
> 
> Sent from my BlackBerryR smartphone with Nextel Direct Connect
> 
> 
> ----------------------------------------------------------------------------
> ----
> WISPA Wants You! Join today!
> http://signup.wispa.org/
> ----------------------------------------------------------------------------
> ----
>  
> WISPA Wireless List: [email protected]
> 
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
> 
> Archives: http://lists.wispa.org/pipermail/wireless/
> 
> 
> 
> --------------------------------------------------------------------------------
> WISPA Wants You! Join today!
> http://signup.wispa.org/
> --------------------------------------------------------------------------------
>  
> WISPA Wireless List: [email protected]
> 
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
> 
> Archives: http://lists.wispa.org/pipermail/wireless/


--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: [email protected]

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to