Exactly how precise do the bends have to be in that tool in order for it to work? :)
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Jeremy Parr Sent: Friday, July 17, 2009 5:38 PM To: WISPA General List Subject: Re: [WISPA] Tranzeo TR-5800 Access 2009/7/17 Jeremy Parr <[email protected]>: > I have a few used TR-5800s that I do not know the IP address so. Any > tricks to locating it? The MAC address is worn off the back label, and > sniffing the wire reveals no activity (should it?). Ok, I got these things reset. All four units responded on the default IP address after resetting, despite not transmitting a single bit of data out of their wired ports before. See the pictures in the link for info on making your own Tranzeo reset tool. http://www.gonzorock.com/gallery/v/Jeremy/TranzeoReset/ ---------------------------------------------------------------------------- ---- WISPA Wants You! Join today! http://signup.wispa.org/ ---------------------------------------------------------------------------- ---- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
