The switch is outside the shield, and if I cold find them, I could do
it myself. but, if someone else is going to do them, I'll be a client . Butch Evans wrote: On Mon, 2009-08-03 at 04:25 -0400, Blair Davis wrote:But, can it be repaired cost effectively?All repairs are $30 for qty over 20. We charge $35 per board for under 20 per order. For a 411, that is probably NOT cost effective. For most other boards, it is. There is very little that we cannot replace on these SBC. I am in the process of gathering the required chips, but I have the ethernet chips for nearly all the routerboards and I have the power controllers and supporting electronics as well. With a few exceptions, I either have in stock, or on the way, everything that is needed to repair about 90%+ of any problem they would have.How about the diversity switch on the UBNT sr2 and sr5 cards?I have not checked on the cost for that part. I would imagine that we would be able to replace this part, but I have not tried working on these cards, yet. The problem with the radio cards, is the rf shield. Getting it off is not a problem, but getting it back into place without changing the rf properties is a bit more challenging and I do not have the proper equipment to guarantee that we have not changed the properties of the card (and therefore the FCC certification). |
-------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/