I am accumulating RB450Gs with bad eth ports. Some ports work fine router works no problem.
Is it the same deal for these cause I need them fixed ;) Scott Carullo Brevard Wireless 321-205-1100 x102 -------- Original Message -------- > From: "Chuck Hogg" <ch...@shelbybb.com> > Sent: Friday, July 31, 2009 5:07 PM > To: "WISPA General List" <wireless@wispa.org> > Subject: [WISPA] WTB: MikroTik RB/411 with blown ethernet ports > > If you have any RB/411's that boot up, but have blown Ethernet ports, I > will buy them from you. > > > > $5/board if you don't want it back > > $20/board if you would like it repaired and sent back to you. > > > > Some boards that we have been receiving cannot be repaired due to a > direct lightning strike. They must be bootable, but without link. > Please contact me off-list for further details. > > > > Regards, > > Chuck Hogg > > Shelby Broadband > 502-722-9292 > ch...@shelbybb.com > > http://www.shelbybb.com > > > > > > ---------------------------------------------------------------------------- ---- > WISPA Wants You! Join today! > http://signup.wispa.org/ > ---------------------------------------------------------------------------- ---- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
