There is an issue about not choosing the correct channel it wants to look at. Try selecting a different channel and / or putting what you put on the bridge or ap in the other side scan list.
Scott Carullo Brevard Wireless 321-205-1100 x102 -------- Original Message -------- > From: "Mike" <[email protected]> > Sent: Friday, October 09, 2009 6:36 PM > To: "WISPA General List" <[email protected]> > Subject: [WISPA] MT half channel > > What is the trick to making a pair of R52Ns talk to each other using > half or quarter channels? I have no problem with the XR2s. I can > have them talking at 20 MHz, and when I turn on half channel they > don't register. 4.0rc1 (as of last night) :-) > > Mike > > > > > ---------------------------------------------------------------------------- ---- > WISPA Wants You! Join today! > http://signup.wispa.org/ > ---------------------------------------------------------------------------- ---- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
