but is that 2' at 2.4 or 5.8?

ducks....

Sent from my iPhone

On Oct 21, 2009, at 7:49 AM, "Brad Belton" <b...@belwave.com> wrote:

> Hmmm, pretty sure a 2' dish is a 2' dish regardless of  
> frequency...or are
> you speaking of the diameter of the feed?
>
> Best,
>
>
> Brad
>
> -----Original Message-----
> From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org]  
> On
> Behalf Of Josh Luthman
> Sent: Wednesday, October 21, 2009 9:40 AM
> To: WISPA General List
> Subject: Re: [WISPA] Identifying 2ft dish frequency
>
> Can you measure diameter and compare it with the 2.4 and 5.8 GHz  
> dishes?
> Never thought about it but they would have to be different sizes.
>
> Josh Luthman
> Office: 937-552-2340
> Direct: 937-552-2343
> 1100 Wayne St
> Suite 1337
> Troy, OH 45373
>
> "When you have eliminated the impossible, that which remains, however
> improbable, must be the truth."
> --- Sir Arthur Conan Doyle
>
>
> On Wed, Oct 21, 2009 at 10:34 AM, Mark McElvy <mmce...@accubak.com>  
> wrote:
>
>> I happen to know they are either 5.8 or 2.4 as this was the only
>> equipment I have found of theirs, they left it all when they went  
>> out of
>> business.
>>
>> Mark McElvy
>> AccuBak Data Systems, Inc.
>> 573.729.9200 - Office
>> 573.729.9203 - Fax
>> 573.247.9980 - Mobile
>> http://www.accubak.com/
>> http://www.accubak.net/
>> Nationwide Internet Access
>> Accurate backups for your critical data!
>>
>>
>> -----Original Message-----
>> From: wireless-boun...@wispa.org [mailto:wireless- 
>> boun...@wispa.org] On
>> Behalf Of ccrum
>> Sent: Wednesday, October 21, 2009 9:29 AM
>> To: WISPA General List
>> Subject: Re: [WISPA] Identifying 2ft dish frequency
>>
>> Got a spectrum analyzer and a frequency generator? Or a good network
>> analyzer will do, but most people don't have one laying around. The
>> feeds could literally be anything. You might be better off just  
>> calling
>> the MFG of the dish and buying new feeds in the range you want unless
>> you you have a few hours of extra time on your hands.
>>
>> Cameron
>>
>> Mark McElvy wrote:
>>> I have 4 two ft dishes that where pulled down when the previous wisp
>>> went out of business. There are no markings on them and I need to
>>> determine frequency and polarity.
>>>
>>>
>>>
>>> Mark McElvy
>>> AccuBak Data Systems, Inc.
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>> --- 
>> ---------------------------------------------------------------------
>> --------
>>> WISPA Wants You! Join today!
>>> http://signup.wispa.org/
>>>
>> --- 
>> ---------------------------------------------------------------------
>> --------
>>>
>>> WISPA Wireless List: wireless@wispa.org
>>>
>>> Subscribe/Unsubscribe:
>>> http://lists.wispa.org/mailman/listinfo/wireless
>>>
>>> Archives: http://lists.wispa.org/pipermail/wireless/
>>>
>>>
>>>
>>
>>
>>
>> --- 
>> ---------------------------------------------------------------------
>> --------
>> WISPA Wants You! Join today!
>> http://signup.wispa.org/
>> --- 
>> ---------------------------------------------------------------------
>> --------
>>
>> WISPA Wireless List: wireless@wispa.org
>>
>> Subscribe/Unsubscribe:
>> http://lists.wispa.org/mailman/listinfo/wireless
>>
>> Archives: http://lists.wispa.org/pipermail/wireless/
>>
>>
>>
>>
> --- 
> --- 
> ----------------------------------------------------------------------
> ----
>> WISPA Wants You! Join today!
>> http://signup.wispa.org/
>>
>>
> --- 
> --- 
> ----------------------------------------------------------------------
> ----
>>
>> WISPA Wireless List: wireless@wispa.org
>>
>> Subscribe/Unsubscribe:
>> http://lists.wispa.org/mailman/listinfo/wireless
>>
>> Archives: http://lists.wispa.org/pipermail/wireless/
>>
>
>
> --- 
> --- 
> ----------------------------------------------------------------------
> ----
> WISPA Wants You! Join today!
> http://signup.wispa.org/
> --- 
> --- 
> ----------------------------------------------------------------------
> ----
>
> WISPA Wireless List: wireless@wispa.org
>
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
>
> Archives: http://lists.wispa.org/pipermail/wireless/
>
>
>
>
> --- 
> --- 
> --- 
> --- 
> --------------------------------------------------------------------
> WISPA Wants You! Join today!
> http://signup.wispa.org/
> --- 
> --- 
> --- 
> --- 
> --------------------------------------------------------------------
>
> WISPA Wireless List: wireless@wispa.org
>
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
>
> Archives: http://lists.wispa.org/pipermail/wireless/


--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to