Ok, just checking.  Good cover...<grin>

Best,


Brad

-----Original Message-----
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Josh Luthman
Sent: Wednesday, October 21, 2009 9:56 AM
To: WISPA General List
Subject: Re: [WISPA] Identifying 2ft dish frequency

The feedhorn specifically.  Maybe the length will help you too.  I know with
higher gain the 5GHz grids are noticeably longer.

Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373

"When you have eliminated the impossible, that which remains, however
improbable, must be the truth."
--- Sir Arthur Conan Doyle


On Wed, Oct 21, 2009 at 10:48 AM, Brad Belton <b...@belwave.com> wrote:

> Hmmm, pretty sure a 2' dish is a 2' dish regardless of frequency...or are
> you speaking of the diameter of the feed?
>
> Best,
>
>
> Brad
>
> -----Original Message-----
> From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
> Behalf Of Josh Luthman
> Sent: Wednesday, October 21, 2009 9:40 AM
> To: WISPA General List
> Subject: Re: [WISPA] Identifying 2ft dish frequency
>
> Can you measure diameter and compare it with the 2.4 and 5.8 GHz dishes?
> Never thought about it but they would have to be different sizes.
>
> Josh Luthman
> Office: 937-552-2340
> Direct: 937-552-2343
> 1100 Wayne St
> Suite 1337
> Troy, OH 45373
>
> "When you have eliminated the impossible, that which remains, however
> improbable, must be the truth."
> --- Sir Arthur Conan Doyle
>
>
> On Wed, Oct 21, 2009 at 10:34 AM, Mark McElvy <mmce...@accubak.com> wrote:
>
> > I happen to know they are either 5.8 or 2.4 as this was the only
> > equipment I have found of theirs, they left it all when they went out of
> > business.
> >
> > Mark McElvy
> > AccuBak Data Systems, Inc.
> > 573.729.9200 - Office
> > 573.729.9203 - Fax
> > 573.247.9980 - Mobile
> > http://www.accubak.com/
> > http://www.accubak.net/
> > Nationwide Internet Access
> > Accurate backups for your critical data!
> >
> >
> > -----Original Message-----
> > From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
> > Behalf Of ccrum
> > Sent: Wednesday, October 21, 2009 9:29 AM
> > To: WISPA General List
> > Subject: Re: [WISPA] Identifying 2ft dish frequency
> >
> > Got a spectrum analyzer and a frequency generator? Or a good network
> > analyzer will do, but most people don't have one laying around. The
> > feeds could literally be anything. You might be better off just calling
> > the MFG of the dish and buying new feeds in the range you want unless
> > you you have a few hours of extra time on your hands.
> >
> > Cameron
> >
> > Mark McElvy wrote:
> > > I have 4 two ft dishes that where pulled down when the previous wisp
> > > went out of business. There are no markings on them and I need to
> > > determine frequency and polarity.
> > >
> > >
> > >
> > > Mark McElvy
> > > AccuBak Data Systems, Inc.
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > ------------------------------------------------------------------------
> > --------
> > > WISPA Wants You! Join today!
> > > http://signup.wispa.org/
> > >
> > ------------------------------------------------------------------------
> > --------
> > >
> > > WISPA Wireless List: wireless@wispa.org
> > >
> > > Subscribe/Unsubscribe:
> > > http://lists.wispa.org/mailman/listinfo/wireless
> > >
> > > Archives: http://lists.wispa.org/pipermail/wireless/
> > >
> > >
> > >
> >
> >
> >
> > ------------------------------------------------------------------------
> > --------
> > WISPA Wants You! Join today!
> > http://signup.wispa.org/
> > ------------------------------------------------------------------------
> > --------
> >
> > WISPA Wireless List: wireless@wispa.org
> >
> > Subscribe/Unsubscribe:
> > http://lists.wispa.org/mailman/listinfo/wireless
> >
> > Archives: http://lists.wispa.org/pipermail/wireless/
> >
> >
> >
> >
>
>
----------------------------------------------------------------------------
> ----
> > WISPA Wants You! Join today!
> > http://signup.wispa.org/
> >
> >
>
>
----------------------------------------------------------------------------
> ----
> >
> > WISPA Wireless List: wireless@wispa.org
> >
> > Subscribe/Unsubscribe:
> > http://lists.wispa.org/mailman/listinfo/wireless
> >
> > Archives: http://lists.wispa.org/pipermail/wireless/
> >
>
>
>
>
----------------------------------------------------------------------------
> ----
> WISPA Wants You! Join today!
> http://signup.wispa.org/
>
>
----------------------------------------------------------------------------
> ----
>
> WISPA Wireless List: wireless@wispa.org
>
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
>
> Archives: http://lists.wispa.org/pipermail/wireless/
>
>
>
>
>
>
----------------------------------------------------------------------------
----
> WISPA Wants You! Join today!
> http://signup.wispa.org/
>
>
----------------------------------------------------------------------------
----
>
> WISPA Wireless List: wireless@wispa.org
>
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
>
> Archives: http://lists.wispa.org/pipermail/wireless/
>


----------------------------------------------------------------------------
----
WISPA Wants You! Join today!
http://signup.wispa.org/
----------------------------------------------------------------------------
----
 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/




--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to