Looks nice. How do you connect to that? The spec sheet isn't clear, just says it has "pins" on it.
Randy ccrum wrote: > I use some Cincon Part EC4BW12, dc-dc convertors for anywhere I need to > power the sub 28v devices. It will take 18-72 v in and output 12 v. I've > had to install a lot of these as most of our sites were 48 v. When we > started replacing 532's with the 400 series, we had to put one in for > every board. They are solid devices and I get them from Mouser (sorry, > don't have a mouser part handy). > > Cameron > > Randy Cosby wrote: > >> http://forum.mikrotik.com/viewtopic.php?f=3&t=36191&start=0 >> >> I'm pulling my hair out and wasting all kinds of money on voltage >> regulators to make sure my solar and dc-powered sites don't cause >> mikrotik routerboards to go into over-voltage protection when the >> batteries get charged over 28v. >> >> I'm begging (and asking for you to join me) Mikrotik to: >> >> 1. Upgrade the over-voltage protection to 30v or higher on 24 volt products. >> 2. Never EVER make another routerboard that runs has over-voltage >> protection at 28v >> 3. Change the over-voltage behavior to cause the device to reboot when >> the voltage drops to acceptable levels, instead of requiring a >> power-cycle to bring it back to life. >> >> Will you join me on this and let Mikrotik, your distributor, etc. know >> your thoughts on this? This is not a new problem, it has been discussed >> repeatedly on the lists and forums. >> >> Thanks! >> >> >> >> > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -- Randy Cosby Vice President InfoWest, Inc 435-674-0165 x 2010 http://www.infowest.com/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/