It "could" be a nightmare, but with appropriate channels being selected - -
it could be ok. IMHO - this is no worse than using multiple radios in a
single enclosure in the same frequency. I guess it could be worse if you
were using multiple radios in a single enclosure AND using an antenna like
this :-)   That would be shooting yourself in both feet :-)

All that smart ass comment just to admit - - - IMHO you are correct in your
assessment of the situation.


Mac




> -----Original Message-----
> From: [email protected] [mailto:[email protected]] On
> Behalf Of Jeremy Parr
> Sent: Thursday, October 29, 2009 11:21 AM
> To: WISPA General List
> Subject: Re: [WISPA] 5.8 Omni
> 
> 2009/10/29 Michael Baird <[email protected]>:
> > What about sectorized omni arrays, any of those out there at 5.8?
> >
> > An example would be
> > http://www.netkrom.com/prod_ant_5.1-5.8ghz_vpol_sector_omni.html
> >
> > Just can't find anybody who sells it to get an idea on pricing.
> 
> I would be very concerned about antenna isolation with that. Using it
> with a radio that does not support transmit sync would be a nightmare.
> 
> 
> -----------------------------------------------------------------------
> ---------
> WISPA Wants You! Join today!
> http://signup.wispa.org/
> -----------------------------------------------------------------------
> ---------
> 
> WISPA Wireless List: [email protected]
> 
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
> 
> Archives: http://lists.wispa.org/pipermail/wireless/
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.5.423 / Virus Database: 270.14.34/2462 - Release Date:
> 10/29/09 07:38:00



--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: [email protected]

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to