I just put up a new repeater site today. I am using MT for the P2P. I aligned the dishes by eyeball and a compass bearing, and think I'm close. The signal at both ends is -71 dBm, but am expecting better. I am going to "wag" one or the other (or both) dishes, but wondered where to start. This list has many answers, so I thought I'd start here.
The master side, 165' feet up shows Tx/Rx CCQ (%) at 88 78 and varies from 86/78 to 91/86 The slave end, about 65' on top of a power pole shows Tx/Rx CCQ (%) at 84/90 and the Tx varies from 76 to 86 but usually stays in the mid 80s. Signal to noise is about 47 on both ends. Which dish would you wag first based on these readings? Mike -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
