The pc is Linux and acts as a nat and dns/dhcp server. It connects to the 2610 with a crossover cable. Ultimately, I want to put everything in an outdoor enclosure and hang it on a pole.... Is this terribly harder to do than set up a 2610? Jason RickG wrote: What are you running on the PC that you want to add the card to? I like integration equipment as well but you're probably better of letting the Cisco do its job and the PC do its job. -RickGOn Wed, Nov 18, 2009 at 11:13 AM, Jason Wallace <supp...@azii.net> wrote:Anyone know where (if?) I can get a PCI card to connect to a T1 for less than the $400 or so I have found on my own? I'd like to "Integrate" some of my equipment and eliminate a cisco 2610 that's really doing nothing but converting my T1 to an ethernet port. It's no worth $400 to do this however... Jason -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/-------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ |
-------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/