smartbridge says it all :) On Wed, Dec 9, 2009 at 11:27 AM, Marlon K. Schafer <o...@odessaoffice.com>wrote:
> Those are the old SmartBridges ones. I'm told they leak. > > Never happened to me, but I didn't position then vertically either. > > marlon > > ----- Original Message ----- > From: "Josh Luthman" <j...@imaginenetworksllc.com> > To: "WISPA General List" <wireless@wispa.org> > Sent: Tuesday, December 08, 2009 3:15 PM > Subject: Re: [WISPA] Fixing buried cable > > > > Ah! Took me an hour to find this (everyone wanting to chat and text and > > call and ask and...) > > > > > http://mouser.com/Search/ProductDetail.aspx?qs=p08Uhw9w2FyOGS2yhLmq6g%3d%3d > > > > Josh Luthman > > Office: 937-552-2340 > > Direct: 937-552-2343 > > 1100 Wayne St > > Suite 1337 > > Troy, OH 45373 > > > > "The secret to creativity is knowing how to hide your sources." > > --- Albert Einstein > > > > > > On Tue, Dec 8, 2009 at 5:45 PM, Robert West > > <robert.w...@just-micro.com>wrote: > > > >> I think anything you do, as long as the conductors are connected and > >> protected from the weather will be fine. Just keep as many twists in > the > >> wire as you can. I've made some pretty nasty splices in the past and > >> they > >> all worked perfectly. I just have a thing about looking professional > and > >> not like duct tape and twine. But that stuff works too! > >> > >> > >> > >> -----Original Message----- > >> From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On > >> Behalf Of Scott Reed > >> Sent: Tuesday, December 08, 2009 5:40 PM > >> To: WISPA General List > >> Subject: Re: [WISPA] Fixing buried cable > >> > >> Ugly isn't an issue as the cable is so short I want dig up a foot of it, > >> re-splice it and bury the splice. > >> > >> Robert West wrote: > >> > I've used those 3-m or scotch crimp button connectors before, got a > box > >> of > >> > them still in the van. It's really ugly though and you have to make > >> > sure > >> > you keep as many twists in the wire as you can. But then you still > >> > have > >> to > >> > seal it all and RTV would be my choice. If I had to, and if I had any > >> > slack, stick the splice down a short tube of maybe PVC and pump it > full > >> of > >> > silicone. Still an ugly way to go. > >> > > >> > Bob- > >> > > >> > > >> > > >> > -----Original Message----- > >> > From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] > On > >> > Behalf Of Scott Reed > >> > Sent: Tuesday, December 08, 2009 5:19 PM > >> > To: 'WISPA General List' > >> > Subject: [WISPA] Fixing buried cable > >> > > >> > I have a customer that cut the cat 5 right at the ground in September. > >> > I put a jack at the ground and a plug on the remaining cable and > >> > wrapped > >> > it up as well as I could, knowing I would be back. Sure enough, today > I > >> > went back to re-fix it in the sleet. What fun. I think it is better > >> > because I used a cat5 splice device and filled it with RTV. > >> > Anyone have a way to fix a cable that is underground? I would rather > >> > not run a new cable and make her bury another one if there is another > >> way. > >> > > >> > > >> > >> -- > >> Scott Reed > >> Sr. Systems Engineer > >> GAB Midwest > >> 1-800-363-1544 x4000 > >> Cell: 260-273-7239 > >> > >> > >> > >> > >> > ---------------------------------------------------------------------------- > >> ---- > >> WISPA Wants You! Join today! > >> http://signup.wispa.org/ > >> > >> > ---------------------------------------------------------------------------- > >> ---- > >> > >> WISPA Wireless List: wireless@wispa.org > >> > >> Subscribe/Unsubscribe: > >> http://lists.wispa.org/mailman/listinfo/wireless > >> > >> Archives: http://lists.wispa.org/pipermail/wireless/ > >> > >> > >> > >> > >> > -------------------------------------------------------------------------------- > >> WISPA Wants You! Join today! > >> http://signup.wispa.org/ > >> > >> > -------------------------------------------------------------------------------- > >> > >> WISPA Wireless List: wireless@wispa.org > >> > >> Subscribe/Unsubscribe: > >> http://lists.wispa.org/mailman/listinfo/wireless > >> > >> Archives: http://lists.wispa.org/pipermail/wireless/ > >> > > > > > > > -------------------------------------------------------------------------------- > > WISPA Wants You! Join today! > > http://signup.wispa.org/ > > > -------------------------------------------------------------------------------- > > > > WISPA Wireless List: wireless@wispa.org > > > > Subscribe/Unsubscribe: > > http://lists.wispa.org/mailman/listinfo/wireless > > > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/