MT can tell you who they sold the board to by the license key. Of, if you're "cool" and have a login to their site, you can request the key to be added to your account, and it'll tell you where it came from.
On Wed, Dec 9, 2009 at 6:45 PM, Robert West <[email protected]>wrote: > Turned out to be........ > > The 411 card. "HUH?" I hear ya say. I dunno either. I attacked the > cables first thing, replaced the pig tail, the short extension of lmr-400 > from the pac grid to enclosure, cat5 to router. Man! Still dead! So I > connected my laptop directly into the 411 board and no response. Reset, > still nothing. Lights up, gives me one beep but never completes the boot, > no cute "beep beep" of satisfaction. Got it here at home, no manner of > resetting gets it, can't get in via serial. Could go with the jtag but I > don't want to deal with putting the pins on it. Bummer. > > Only 4 months old, this one is. "Now where did I buy the thing?" is what > I'm > asking myself. MT says to RMA through the distributor but I pick these > things up from whoever has the UBNT stuff in stock at the time, I just add > to the order. The invoices don't list the MAC ID or serial number, not > that > I can see. Could be Streakwave, Wlanparts or Wisp-router. I think I > bought > a few things form Jeffs Soho, might have just been 433's.... > > Anyhow, any tips on the RMA on these things? Does it really matter who > gets > the hit? I'd vote for Streakwave, they're closer. > > Bob- > > > > -----Original Message----- > From: [email protected] [mailto:[email protected]] On > Behalf Of MDK > Sent: Wednesday, December 09, 2009 1:45 PM > To: WISPA General List > Subject: Re: [WISPA] Wind! > > The last time I experienced that, it was a bad cable end, where the wind > had > > shaken the last 18 inches of 400 size cable - the distance from the last > clamp to the N connector, and the N connector had literally shaken apart. > The entire braiding had broken loose and the compression on the foam inner > had crushed until the whole cable began creeping out of the connector. > It > > was cold, and even the shrink wrap had cracked, and the tape wrapped over > that was just slowly stretching... > > > > > > > > -------------------------------------------------- > From: "Robert West" <[email protected]> > Sent: Wednesday, December 09, 2009 8:12 AM > To: "'WISPA General List'" <[email protected]> > Subject: [WISPA] Wind! > > > Windy today, supposed to have gusts up to 50mph before days end. I was > > monitoring some backhaul links, had one bouncing from -72 to -83. Up and > > down. I'm thinking, uh-oh, got a grid loose someplace, better go fix it > > now > > before it gets worse. I go out, first end solid as can be. I even shake > > the heck out of it, all good. I guess the other end is messed up. Go > > out, > > also solid. Look at the laptop, still bouncing. Using pac 28dbi grids > > with > > 411 boards R52h cards on both sides. First grid is at 60', second at > 100' > > No trees, heck I can almost see the other end with my naked and cold eye. > > It's only 4 miles out. Link is normally -72. Maybe junk being tossed up > > in > > the wind? That would be a lot ot junk for -10 drop in RSSI I would > think. > > > > > > > > Just sharing. Weird. > > > > > > > > > > > > Robert West > > > > Just Micro Digital Services Inc. > > > > 740-335-7020 > > > > > > > > > > > > > > ---------------------------------------------------------------------------- > ---- > > WISPA Wants You! Join today! > > http://signup.wispa.org/ > > > > ---------------------------------------------------------------------------- > ---- > > > > WISPA Wireless List: [email protected] > > > > Subscribe/Unsubscribe: > > http://lists.wispa.org/mailman/listinfo/wireless > > > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > ---------------------------------------------------------------------------- > ---- > WISPA Wants You! Join today! > http://signup.wispa.org/ > > ---------------------------------------------------------------------------- > ---- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > > -------------------------------------------------------------------------------- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
