Yes, that will work if it is the DP version of the Powerstation. Regards, Chuck Hogg Shelby Broadband 502-722-9292 ch...@shelbybb.com http://www.shelbybb.com
-----Original Message----- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Robert West Sent: Friday, December 11, 2009 5:36 PM To: 'WISPA General List' Subject: [WISPA] Convert PowerStation2 to 411 with MIMO? Slow day..... Tinkering today. I have a PowerStation2 with the panel but the board was popped due to surge, (my fault, didn't like the 48v power supply I plugged into it). Was gonna replace the board with a LightStation, never did... But if I put a 411ah in it with a R2N and used pigtails to convert the MMCX on the antenna to the U.FL (I have those pigtails already, I use them on all the MT cards and hot glue the little SOB's on!) would the R2N be cool with using both polarities of the PowerStation panel at the same time in Mimo mode? I'm gonna try is anyhow, just didn't know how that panel antenna would react with that. I'm not an antenna guy.... Obviously. Robert West Just Micro Digital Services Inc. 740-335-7020 ------------------------------------------------------------------------ -------- WISPA Wants You! Join today! http://signup.wispa.org/ ------------------------------------------------------------------------ -------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/