Try #3 in sending this with a link removed. We guarantee our workmanship in the assembly. For example, if for some reason water were to get in because of our failure to make sure the unit is sealed properly, we will replace it. The warranty sticker must be intact.
If it is a component failure, the warranty for the component applies. We have cross-shipped replacements for clients in good standing and a credit card on account. Kits are available on the website. If you wish to modify components, let us know and we will add those to the kit options. Regards, Chuck Hogg Shelby Broadband 502-722-9292 ch...@shelbybb.com http://www.shelbybb.com -----Original Message----- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Marlon K. Schafer Sent: Friday, January 08, 2010 2:41 PM To: WISPA General List Subject: Re: [WISPA] MT Mikropoynt Thanks Chuck. What's an RJ45-ECS? What's the warrantee on these units? Are there other antenna size choices? I really like the Pac Wireless pass through connectors. I hate having to take a screw driver up with me much to depress the tab on an ethernet connection! laters, marlon ----- Original Message ----- From: "Chuck Hogg" <ch...@shelbybb.com> To: "WISPA General List" <wireless@wispa.org> Sent: Friday, January 08, 2010 10:44 AM Subject: Re: [WISPA] MT Mikropoynt > Normally, We do the RJ45-ECS. Some customers prefer it the other way, > and a build may have been done without. I agree they are a pain, I > prefer with RJ45-ECS as well. Make sure you have your account setup for > WISPA (Coupon Code: FREEBUILD), and you get the builds done for free on > these kits. If you have any special requests for QLW, just put them in > the notes section of your order and we will make it happen. > > Regards, > Chuck Hogg > Shelby Broadband > 502-722-9292 > ch...@shelbybb.com > http://www.shelbybb.com > > > -----Original Message----- > From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On > Behalf Of Josh Luthman > Sent: Friday, January 08, 2010 1:31 PM > To: WISPA General List > Subject: Re: [WISPA] MT Mikropoynt > > How about both good price and well built? Order 5+ and you save $50+. > > http://quicklinkwireless.com/Customkititems.asp?kc=KIT-58-23A-R52&eq= > > I personally have them deliver the parts. I have someone at the office > build them and test them (they charge 7/unit and my guy can do 2.5 > builds/hr). > > Some of them they did build as I made a mistake on ordering. They do > not > use the rj45-ecs but rather put the 411 up to the connectivity hole, > though > if you ask I expect they will. I absolute can NOT STAND THAT. You can > see > the link lights, but it is a absolute bear to plug it in (or it was on a > grain leg and water tower Saturday before last in the cold windy snow). > > I love the mounting system. Their only flaw is they are a bit weighty > which > can be tiring. I have had nothing but success with these antennas. I > made > be flogged for saying this, but my experience has been better with these > then Motorola 5700s (on a different tower). > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > "The secret to creativity is knowing how to hide your sources." > --- Albert Einstein > > > On Fri, Jan 8, 2010 at 1:21 PM, Marlon K. Schafer > <o...@odessaoffice.com>wrote: > >> Hi All, >> >> I've been seeing way to high of a failure rate or dead out of the box >> problem with these radios. I'm using the 411 versions. >> >> One even had an antenna that wasn't connected inside, broken solder > joint. >> >> Anyone else seeing such high failure rates? It's got to be close to > 20 or >> 25% here. >> >> Anyone know of a nice pre-built kit that I can use instead? Price is > NOT >> the top priority here. I'm just using these 5.8 gig versions in > places >> that >> the 2.4 is maxed out or for higher end business customers. >> >> thanks, >> marlon >> >> >> >> >> > ------------------------------------------------------------------------ > -------- >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> >> > ------------------------------------------------------------------------ > -------- >> >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> > > > ------------------------------------------------------------------------ > -------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > ------------------------------------------------------------------------ > -------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > ------------------------------------------------------------------------ -------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > ------------------------------------------------------------------------ -------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ ------------------------------------------------------------------------ -------- WISPA Wants You! Join today! http://signup.wispa.org/ ------------------------------------------------------------------------ -------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/