We among many others carry this one. http://store.wisp-router.com/itemdesc.asp?ic=SP-POE-MJ8&eq=&Tp=
Since this is an indoor model and should be placed as close as possible to the poe powered device to provide maximum protection to the unit for any power surge induced over you cat5 run I have personally never tested it with Canopy. But it should work well with as far as I know it does not distinguish between positive or negative requirements on the power cablings. Keep in mind that that unit clamps at 60V which is far more than Standard Canopy units can handle. Better selection might be the SP-POE-MJ24 which is designed to protect 24V units and have a clamping level of 30V on the power side and 7.5V on the data wires. http://store.wisp-router.com/itemdesc.asp?ic=SP-POE-MJ24&eq=&Tp= We use them all the time with MikroTik and Ubiquiti radios as well sell them for that usage. I could if you want test to make sure they work with Canopy but I do not see a reason why not from my knowledge of the units design. / Eje -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Scottie Arnett Sent: Tuesday, January 12, 2010 4:33 PM To: WISPA General List Subject: Re: [WISPA] Can I use Motorola Canopy 600SSB Surge Suppressor withUBNT radios or Mikrotik? Will these work with Canopy? Where can you get them? Price? They look like really nice units and they way they separate the data and power protection seems a better idea than competing products. Thanks, Scottie ---------- Original Message ---------------------------------- From: Data Technology <[email protected]> Reply-To: WISPA General List <[email protected]> Date: Mon, 11 Jan 2010 10:56:40 -0600 >I guess I hit enter before I was thru typing. > >I also use the Citel in-line suppressors (60v) in every AP that I build. >http://www.citel.us/data_sheets/dataline/MJ850524D3A6012B-DataSheet.pdf > >Knock on wood, I have never lost an ethernet port on a unit that has >this surge suppressor installed. >I had an AP go dead a couple of months ago. When I opened the enclosure >there was water in the bottom of the enclosure and the surge suppressor >was actually melted from the connector shorting out, but the MT board >was fine. > >LaRoy McCann >Data Technology > >Josh Luthman wrote: >> I know it isn't said very often but the voltages for the devices we commonly >> use are >> >> Canopy 12-24v >> Nano/Locostations 12-25v >> MT 4xx 10-28v >> >> Cordless drill battery 18-22v >> >> Having a mobile POE priceless >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> "The secret to creativity is knowing how to hide your sources." >> --- Albert Einstein >> >> >> On Mon, Jan 11, 2010 at 11:31 AM, Data Technology <[email protected]> wrote: >> >> >>> Good point about the voltage. >>> I use them mostly for UBNT CPE. What MT units I used them with were 18 >>> or 24V. >>> >>> >>> >>> Tom DeReggi wrote: >>> >>>> The 600SSB still clamps at 35V like the 300SS, right? >>>> >>>> If so, make sure you are using Less than 35V Mikrotiks units and not 48V >>>> configurations. >>>> >>>> As an alternative.... Citel also makes a nice outdoor mountable unit >>>> specifically for wifi pin-outs, about the same cost ($25ish). >>>> They have both 60Vand 35V models. >>>> >>>> Tom DeReggi >>>> RapidDSL & Wireless, Inc >>>> IntAirNet- Fixed Wireless Broadband >>>> >>>> >>>> ----- Original Message ----- >>>> From: "Data Technology" <[email protected]> >>>> To: <[email protected]>; "WISPA General List" < >>>> >>> [email protected]> >>> >>>> Sent: Monday, January 11, 2010 9:55 AM >>>> Subject: Re: [WISPA] Can I use Motorola Canopy 600SSB Surge Suppressor >>>> >>> with >>> >>>> UBNT radios or Mikrotik? >>>> >>>> >>>> >>>> >>>>> Yes you can. You have to move the ground jumper. Just loosen the nuts >>>>> and move the jumper to the hole with no copper. >>>>> The jumper will short out the + voltage to ground. >>>>> >>>>> LaRoy McCann >>>>> Data Technology >>>>> >>>>> >>>>> Scott Carullo wrote: >>>>> >>>>> >>>>>> Not sure if it matters that the voltage + and - are swapped... >>>>>> >>>>>> Thanks >>>>>> >>>>>> Scott Carullo >>>>>> Brevard Wireless >>>>>> 321-205-1100 x102 >>>>>> >>>>>> >>>>>> >>>>>> >>> ---------------------------------------------------------------------------- ---- >>> >>>>>> WISPA Wants You! Join today! >>>>>> http://signup.wispa.org/ >>>>>> >>>>>> >>> ---------------------------------------------------------------------------- ---- >>> >>>>>> WISPA Wireless List: [email protected] >>>>>> >>>>>> Subscribe/Unsubscribe: >>>>>> http://lists.wispa.org/mailman/listinfo/wireless >>>>>> >>>>>> Archives: http://lists.wispa.org/pipermail/wireless/ >>>>>> >>>>>> ---------- >>>>>> >>>>>> This message has been scanned for viruses and >>>>>> dangerous content by the Data Technology >>>>>> MailScanner, and is believed to be clean. >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>> >>> ---------------------------------------------------------------------------- ---- >>> >>>>> WISPA Wants You! Join today! >>>>> http://signup.wispa.org/ >>>>> >>>>> >>> ---------------------------------------------------------------------------- ---- >>> >>>>> WISPA Wireless List: [email protected] >>>>> >>>>> Subscribe/Unsubscribe: >>>>> http://lists.wispa.org/mailman/listinfo/wireless >>>>> >>>>> Archives: http://lists.wispa.org/pipermail/wireless/ >>>>> >>>>> >>>>> -- >>>>> Internal Virus Database is out-of-date. >>>>> Checked by AVG. >>>>> Version: 7.5.560 / Virus Database: 270.12.26/2116 - Release Date: >>>>> 5/15/2009 6:16 AM >>>>> >>>>> >>>>> >>>>> >>>> >>>> >>>> >>> ---------------------------------------------------------------------------- ---- >>> >>>> WISPA Wants You! Join today! >>>> http://signup.wispa.org/ >>>> >>>> >>> ---------------------------------------------------------------------------- ---- >>> >>>> WISPA Wireless List: [email protected] >>>> >>>> Subscribe/Unsubscribe: >>>> http://lists.wispa.org/mailman/listinfo/wireless >>>> >>>> Archives: http://lists.wispa.org/pipermail/wireless/ >>>> >>>> ---------- >>>> >>>> This message has been scanned for viruses and >>>> dangerous content by the Data Technology >>>> MailScanner, and is believed to be clean. >>>> >>>> >>>> >>>> >>> >>> >>> ---------------------------------------------------------------------------- ---- >>> WISPA Wants You! Join today! >>> http://signup.wispa.org/ >>> >>> ---------------------------------------------------------------------------- ---- >>> >>> WISPA Wireless List: [email protected] >>> >>> Subscribe/Unsubscribe: >>> http://lists.wispa.org/mailman/listinfo/wireless >>> >>> Archives: http://lists.wispa.org/pipermail/wireless/ >>> >>> >> >> >> ---------------------------------------------------------------------------- ---- >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> ---------------------------------------------------------------------------- ---- >> >> WISPA Wireless List: [email protected] >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> >> ---------- >> >> This message has been scanned for viruses and >> dangerous content by the Data Technology >> MailScanner, and is believed to be clean. >> >> >> > > > >--------------------------------------------------------------------------- ----- >WISPA Wants You! Join today! >http://signup.wispa.org/ >--------------------------------------------------------------------------- ----- > >WISPA Wireless List: [email protected] > >Subscribe/Unsubscribe: >http://lists.wispa.org/mailman/listinfo/wireless > >Archives: http://lists.wispa.org/pipermail/wireless/ >--- >[This E-mail scanned for viruses by Declude Virus] > > Wireless High Speed Broadband service from Info-Ed, Inc. as low as $30.00/mth. Check out www.info-ed.com/wireless.html for information. ---------------------------------------------------------------------------- ---- WISPA Wants You! Join today! http://signup.wispa.org/ ---------------------------------------------------------------------------- ---- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
