I'm using the Cisco because it was given to me. I prefer Polycom units. Asterisk is on the backend.
----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com -------------------------------------------------- From: "Data Technology" <[email protected]> Sent: Wednesday, January 13, 2010 11:18 AM To: "WISPA General List" <[email protected]> Subject: Re: [WISPA] Semi-OT Cisco PoE > Mike, > What system are using the phone with? > > I just got a couple of Polycom IP 335 phones in today to play around with. > I have installed Trixbox with a Linksys SPA3102 and a Grandstream > GXW4108 gateway and it seems to work ok. > Not had time to configure the Polycom's yet. > > LaRoy McCann > Data Technology > > Mike Hammett wrote: >> To answer my own question, it appears that I could use a standard >> PacWireless 48v PoE and just cross pins 4/5 and 7/8. 4/5 are negative >> and >> 7/8 are positive on the Cisco, while 4/5 are positive and 7/8 are >> negative >> on the PacWireless. PacWireless does have a reversed model, but it's >> only >> 24v vs. the 48v required for the Cisco. >> >> To make all of this moot, I found a Cisco PoE unit immediately under the >> Cisco phone. DOH! >> >> >> ----- >> Mike Hammett >> Intelligent Computing Solutions >> http://www.ics-il.com >> >> >> >> -------------------------------------------------- >> From: "Mike Hammett" <[email protected]> >> Sent: Wednesday, January 13, 2010 10:57 AM >> To: <[email protected]> >> Subject: [WISPA] Semi-OT Cisco PoE >> >> >>> I believe I need a AIR-PWRINJ3 PoE injector for a Cisco 7960 phone. >>> Would >>> anything we use be an appropriate replacement? >>> >>> >>> ----- >>> Mike Hammett >>> Intelligent Computing Solutions >>> http://www.ics-il.com >>> >>> >>> >>> -------------------------------------------------------------------------------- >>> WISPA Wants You! Join today! >>> http://signup.wispa.org/ >>> -------------------------------------------------------------------------------- >>> >>> WISPA Wireless List: [email protected] >>> >>> Subscribe/Unsubscribe: >>> http://lists.wispa.org/mailman/listinfo/wireless >>> >>> Archives: http://lists.wispa.org/pipermail/wireless/ >>> >>> >> >> >> -------------------------------------------------------------------------------- >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> -------------------------------------------------------------------------------- >> >> WISPA Wireless List: [email protected] >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> >> ---------- >> >> This message has been scanned for viruses and >> dangerous content by the Data Technology >> MailScanner, and is believed to be clean. >> >> >> > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
