We use galvanized 2 pipe and 3/4 inch allthread. Drill an hole through the pipe and pole and use nuts and washers to put them together with a 6 inch or so space between them.
David > -----Original Message----- > From: [email protected] [mailto:[email protected]] On > Behalf Of AJ > Sent: Monday, January 25, 2010 10:50 AM > To: WISPA General List > Subject: [WISPA] Side Mount to Wooden Utility Pole? > > Anyone have any detailed photos or ideas for side mounting to a wooden > utility pole? > > We have a site that will only allow side mounting at about 35' AGL on a > wooden utility pole. > > I considered building a stand off bracket out of Unistrut and mounting > it > directly through the hole with galvanized hardware but it seems a bit > overkill for a single omni. > > Thanks! > > > ----------------------------------------------------------------------- > --------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > ----------------------------------------------------------------------- > --------- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
