I'd turn it down till you hit about a -60 signal wise or in the 50's somewhere. should give you the best results.
Nick Olsen Network Engineer / Customer Support (321) 205-1100 x106 ---------------------------------------- From: "RickG" <rgunder...@gmail.com> Sent: Monday, February 01, 2010 8:08 PM To: "WISPA General List" <wireless@wispa.org> Subject: [WISPA] power OK, I need a little input. I've got several "poor mans repeaters" around by using a pair of bullets, one for backhaul and the other for the AP. Today, I installed a Bullet on a new customer that was a stones throw away from the AP. At full power, he got just under 1Mbps. Turning down the power, he got 3Mbps+. Is turning down the power on the CPE side on a test and trial basis or is there some kind of method to it? -RickG ---------------------------------------------------------------------------- ---- WISPA Wants You! Join today! http://signup.wispa.org/ ---------------------------------------------------------------------------- ---- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
