I would say it would depend on how hot the signal was, you don't want it 
yelling so loud it can't hear itself or anything else think.

---------- Original Message ----------------------------------
From: RickG <rgunder...@gmail.com>
Reply-To: WISPA General List <wireless@wispa.org>
Date:  Mon, 1 Feb 2010 20:08:19 -0500

>OK, I need a little input. I've got several "poor mans repeaters" around by
>using a pair of bullets, one for backhaul and the other for the AP. Today, I
>installed a Bullet on a new customer that was a stones throw away from the
>AP. At full power, he got just under 1Mbps. Turning down the power, he got
>3Mbps+. Is turning down the power on the CPE side on a test and trial basis
>or is there some kind of method to it?
>-RickG
>
>
>--------------------------------------------------------------------------------
>WISPA Wants You! Join today!
>http://signup.wispa.org/
>--------------------------------------------------------------------------------
> 
>WISPA Wireless List: wireless@wispa.org
>
>Subscribe/Unsubscribe:
>http://lists.wispa.org/mailman/listinfo/wireless
>
>Archives: http://lists.wispa.org/pipermail/wireless/
>
 




________________________________________________________________
Sent via the WebMail system at avolve.net


 
                   


--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to