Thanks everyone for the helpful suggestions, looks like I got my shopping list for the Honduras install.
We are leaving March 12th, and if anyone is interested I can put pictures up of the install & the kids we are helping. Thanks again, WISPA is a great community and I love being part of it. -Israel Israel Lopez-LISTS wrote: > Hey All, > > So how do you guys avoid getting water/moisture in your gear? > > I'm going to be standing up a 9 end-point network, with some Ubiquiti > (Bullet2, Nanostation) gear, Directional & H-Pol Omni antennas, > Polyphasers, Ethernet Lightning Arrestors, etc,. I'm not going to be > able to travel to the site again in at least a year; its a rainy part of > the world, so I'd like to prevent any damage to the gear as much as > possible. > > Anything I should do to prevent moisture from getting into the gear? Or > other protective measures... Teflon on the coax connectors, Electrical > Tape on the Edges of the gear? If there was a place I could see some > pictures of the implementations that would be good too. > > -Israel > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
