We've been primarily an Alvarion WISP in the past, but decided to use higher speed / lower cost gear for our expansion. Went with the Tranzeo 2.4 stuff for a new POP recently. Connected our first Client out there. After we read all of the words and realized that Vertical Polarity was the "other" way, we now have great signal. :-)
The problem is, we're losing Ethernet connectivity on the inside to the Router. About every 10-15 minutes, it drops off, then comes back on its own after about 5 minutes. We've replaced Radios, Cable Ends, Power Supply, Router, Changed IP Addresses - Still drops off. It's a TR-CPQ unit in bridged mode - Any time that the Router is "off-line", I can still access the Radio. Has anyone else experienced anything like this? -Gary- -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
