Actually found pretty close to what I was looking for.  Motorized mounts 
made for Free to Air satellite dish.  Under a hundred bucks, can't beat 
that!

Won't take much to modify.  Always good.

Bob-

----- Original Message ----- 
From: <[email protected]>
To: "WISPA General List" <[email protected]>
Sent: Sunday, April 25, 2010 1:01 PM
Subject: Re: [WISPA] Remotely Adjusted Dish Mount


> Just mount it to a commercial PTZ camera mount. There are plenty on E-Bay 
> and you can mount a camera on it to so you know what you are looking at
> Sent from my Verizon Wireless BlackBerry
>
> -----Original Message-----
> From: "Chuck Profito" <[email protected]>
> Date: Sun, 25 Apr 2010 09:49:18
> To: 'WISPA General List'<[email protected]>
> Subject: Re: [WISPA] Remotely Adjusted Dish Mount
>
>
> why not just two TV rotor motors mounted in a cross. Or use a ham rotor on
> bottom and light channel master on top. The pole could go thru it so you
> could mount a wireless zoom camera to the other side for balance and LOS
> convenience. or put Horiz on one side and Vertical on the other, and don't
> forget the camera in the middle.  you could be the local loco wisp 
> reporter
> at all the breaking news sites. (We know you already have the scanner)
>
> -----Original Message-----
> From: [email protected] [mailto:[email protected]] On
> Behalf Of Robert West
> Sent: Sunday, April 25, 2010 6:50 AM
> To: WISPA General List
> Subject: Re: [WISPA] Remotely Adjusted Dish Mount
>
> Thanks, Mike.  That's pretty close to what I envision. I need azimuth and
> rotation.  I have a set of step motors from an upgrade on one of my
> telescopes and thought of maybe doing a McGyver on it but if there was
> something already out there that would allow a small dish to mount to it 
> it
> would save me time since I never have any as it is.
>
> The mast has a 125 pound payload rating so I can go pretty beefy.
>
> Bob-
>
> ----- Original Message ----- 
> From: "Mike" <[email protected]>
> To: "'WISPA General List'" <[email protected]>
> Sent: Sunday, April 25, 2010 9:24 AM
> Subject: Re: [WISPA] Remotely Adjusted Dish Mount
>
>
>> Not exactly sure what you're looking for, but Yaesu makes some really 
>> nice
>> Az/El rotators.  I would think azimuth control would be good enough.
>> There
>> are a lot of cheap TV antenna type rotators.
>>
>> Friendly Regards,
>>
>> Mike
>>
>> -----Original Message-----
>> From: [email protected] [mailto:[email protected]] On
>> Behalf Of Robert West
>> Sent: Sunday, April 25, 2010 12:43 AM
>> To: WISPA General List
>> Subject: [WISPA] Remotely Adjusted Dish Mount
>>
>> I recently acquired an 80 foot Super Heavy Duty Will-Burt telescopic mast
>> with the goal for dual use of A) Site Survey and B) Emergency use during
>> AP
>> failure.
>>
>> I'm looking for a dish mount that can be remotely adjusted while the mast
>> is
>> extended.  I haven't seen anything in my searches, wanted to know if
>> anyone
>> is using such a thing or have any recommendations of something they have
>> seen.
>>
>> It's a cool toy so I gots to at least make the wife think I'm really 
>> gonna
>> use it.
>>
>> Bob-
>>
>>
>>
>>
> ----------------------------------------------------------------------------
>> ----
>> WISPA Wants You! Join today!
>> http://signup.wispa.org/
>>
> ----------------------------------------------------------------------------
>> ----
>>
>> WISPA Wireless List: [email protected]
>>
>> Subscribe/Unsubscribe:
>> http://lists.wispa.org/mailman/listinfo/wireless
>>
>> Archives: http://lists.wispa.org/pipermail/wireless/
>>
>>
>>
>>
>>
>>
> ----------------------------------------------------------------------------
> ----
>> WISPA Wants You! Join today!
>> http://signup.wispa.org/
>>
> ----------------------------------------------------------------------------
> ----
>>
>> WISPA Wireless List: [email protected]
>>
>> Subscribe/Unsubscribe:
>> http://lists.wispa.org/mailman/listinfo/wireless
>>
>> Archives: http://lists.wispa.org/pipermail/wireless/
>>
>>
>
>
>
>
> ----------------------------------------------------------------------------
> ----
> WISPA Wants You! Join today!
> http://signup.wispa.org/
> ----------------------------------------------------------------------------
> ----
>
> WISPA Wireless List: [email protected]
>
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
>
> Archives: http://lists.wispa.org/pipermail/wireless/
>
>
>
> --------------------------------------------------------------------------------
> WISPA Wants You! Join today!
> http://signup.wispa.org/
> --------------------------------------------------------------------------------
>
> WISPA Wireless List: [email protected]
>
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
>
> Archives: http://lists.wispa.org/pipermail/wireless/
>
>
>
> --------------------------------------------------------------------------------
> WISPA Wants You! Join today!
> http://signup.wispa.org/
> --------------------------------------------------------------------------------
>
> WISPA Wireless List: [email protected]
>
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
>
> Archives: http://lists.wispa.org/pipermail/wireless/
>
> 




--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: [email protected]

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to