What kind of ImageStream is this? I know you have to reboot it and do something when it first starts. If memory serves me right you have to hit enter when it's loading with the "........" at the bottom...
I can run over to the closet and get the bitrates of my Rebel if you need them. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 “Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill On Mon, Apr 26, 2010 at 3:31 PM, Tom Sharples <tsharp...@qorvus.com> wrote: > Just fired up the Imagestream gateway router we picked up on Ebay. It was > supposed to have been returned to factory defaults, but apparently was not, > since I can't get in using "root / <blank> " on the CLI. Does anyone out > here know how to reset the unit? I can't find any on-line documentation that > describes the process. > > Thanks, > > Tom S. > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
