I agree with Rick¹s percentage. If it is a traditional telco circuit you should get a concrete answer on how long it will take to add an additional circuit. I had to go 8 months one time to add another T1 into our bond.
Justin -- Justin Wilson <j...@mtin.net> http://www.mtin.net/blog Wisp Consulting Tower Climbing Network Support From: RickG <rgunder...@gmail.com> Reply-To: WISPA General List <wireless@wispa.org> Date: Thu, 20 May 2010 09:54:49 -0400 To: WISPA General List <wireless@wispa.org> Subject: Re: [WISPA] Bandwidth When you peak at 65-75 percent its probably time to add more. It depends on how fast your filling it up and how long it takes to implement the new capacity. -RickG On Thu, May 20, 2010 at 9:09 AM, Jeremie Chism <jchi...@gmail.com> wrote: > At what percentage of your backbone usage do you look at adding more > capacity. At peak times I run at 65-70 percent of capacity. Just > looking for suggestions. > > Sent from my iPhone > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > ---------------------------------------------------------------------------- ---- WISPA Wants You! Join today! http://signup.wispa.org/ ---------------------------------------------------------------------------- ---- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/