---------- Original Message ----------------------------------
From: Michael Ford <[email protected]>
Date: Thu, 20 May 2010 18:58:09 -0700
Hey Guys,
This is not possible due to the nature of 802.11n hardware. Chain 0 is
physically attached to the port, and cannot be software switched. In 1x1
MIMO, on a 2x2 device, the hardware will always go to Chain 0 for 1x1 rates.
It cannot go to Chain 1.
Thanks,
________________________________________________________________
Sent via the WebMail system at avolve.net
--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
WISPA Wireless List: [email protected]
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
