Maybe masquerade them? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
“Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill On Mon, May 31, 2010 at 11:54 PM, Robert West <[email protected]> wrote: > Now this is on a nat'd network. I don't seem to be able to ping any of the > remote clients but I can ping the MT ports. Are the lan clients isolated > somehow by default? Do I need to do something with forward or with a > hammer? > > Bob- > > > > > -----Original Message----- > From: [email protected] [mailto:[email protected]] On > Behalf Of Nick Olsen > Sent: Monday, May 31, 2010 10:41 PM > To: WISPA General List > Subject: Re: [WISPA] Mikrotik PtPP Sample Script, Anyone? > > Its all about the IP you give the client. > I always handed it a ip of the associated network and it would work. > Example. RB750 in our colo. Network is 1.1.1.0/24 This is the configuration > of a ppp client that has access to the internal colo servers > > add caller-id="" comment="" disabled=no limit-bytes-in=0 limit-bytes-out=0 > local-address=\ > 1.1.1.50 name=USERNAME password=PASSWORD profile=default-encryption > remote-address=\ > 1.1.1.51 routes="" service=any > > Profile is this > > set default-encryption bridge=bridge1 change-tcp-mss=yes comment="" name=\ > default-encryption only-one=default use-compression=default > use-encryption=yes \ > use-vj-compression=default > > Bridge 1 contains single Ethernet interface that plugs into the colo switch. > > Should work :D but no promises. > > Nick Olsen > Network Operations > (321) 205-1100 x106 > > ---------------------------------------- > > From: "Robert West" <[email protected]> > Sent: Monday, May 31, 2010 9:32 PM > To: "WISPA General List" <[email protected]> > Subject: [WISPA] Mikrotik PtPP Sample Script, Anyone? > > Been trying to setup a PTPP server on a Mikrotik 600A running 5.2 Beta. > NO > LUCK! I can connect to it just fine but can't see anything on the remote > network. Anyone have a sample PTPP script that works? > > Bob- > > ---------------------------------------------------------------------------- > ---- > WISPA Wants You! Join today! > http://signup.wispa.org/ > ---------------------------------------------------------------------------- > ---- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > ---------------------------------------------------------------------------- > ---- > WISPA Wants You! Join today! > http://signup.wispa.org/ > ---------------------------------------------------------------------------- > ---- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
