We went LLC taxed as an S Corp not so much for tax reasons as we did legal
reasons.



-----Original Message-----
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Jeromie Reeves
Sent: Monday, June 07, 2010 12:49 PM
To: WISPA General List
Subject: Re: [WISPA] Repeater

That is what I do. It works well for hitting small pockets, a dozen
people or so,plus I use it when the client wants a AP. People are not
allowed to connect things to the network with out permission, if they
do, and it runs their bill up, they get the idea quickly.

On Mon, Jun 7, 2010 at 10:08 AM, RickG <rgunder...@gmail.com> wrote:
> Depending on needs, you could use a Pico for the AP, then no antenna.
>
> On Mon, Jun 7, 2010 at 10:46 AM, Steve Barnes <st...@pcswin.com> wrote:
>> Thanks Chuck you also forgot $100 for Antennas on the MT system.
>>
>> Steve Barnes
>> RC-WiFi Wireless Internet Service
>>
>>
>> -----Original Message-----
>> From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Chuck Hogg
>> Sent: Monday, June 07, 2010 10:38 AM
>> To: WISPA General List
>> Subject: Re: [WISPA] Repeater
>>
>> Steve:
>>
>> I don't think you're going to get much cheaper than what you said below,
but here's a try.
>>
>> Nanostation M/Nanostation Loco M for the AP, Bullet/Nano for the
Backhaul.  The Nanostation M's have a software enabled POE 2nd port.
>> Run one cable up, then Port 2 POE to the Bullet.  Choose your antennas.
>>
>> MSRP
>> 2 x Nano's = $160
>>
>> 2x R52 radios = $80
>> 1 x RB/433 = $99
>> $180
>>
>> With the MT you will need a case and pigtails...making it more expensive
even more.
>>
>> Regards,
>> Chuck Hogg
>> Shelby Broadband
>> 502-722-9292
>> ch...@shelbybb.com
>> http://www.shelbybb.com
>>
>>
>> -----Original Message-----
>> From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Steve Barnes
>> Sent: Monday, June 07, 2010 10:01 AM
>> To: WISPA General List
>> Subject: [WISPA] Repeater
>>
>> I have avoided repeaters like the plague but I have a situation where I
have one and I am looking for a better option.  When I started my wisp I was
100% Tranzeo.  At this one location I setup a CPE connected to a
>> TR-6000 that has 2 Ethernet ports that pass through POE.  I ran 1
Ethernet up the tower with a POE at the bottom, and a crossover in between.
>>
>> I would like a similar layout for other locations.   Issue I see is that
>> not many other units, UBNT or MT have a 2nd Ethernet that pass through
POE?
>>
>> How does everyone you get around this?
>>
>> Trying to stay cheaper than a RB433, 2 radios, and 2- antennas, box,
pigtails, 2 LMR cables.
>>
>> Steve Barnes
>> RC-WiFi Wireless Internet Service
>>
>>
>> ------------------------------------------------------------------------
>> --------
>> WISPA Wants You! Join today!
>> http://signup.wispa.org/
>> ------------------------------------------------------------------------
>> --------
>>
>> WISPA Wireless List: wireless@wispa.org
>>
>> Subscribe/Unsubscribe:
>> http://lists.wispa.org/mailman/listinfo/wireless
>>
>> Archives: http://lists.wispa.org/pipermail/wireless/
>>
>>
>>
----------------------------------------------------------------------------
----
>> WISPA Wants You! Join today!
>> http://signup.wispa.org/
>>
----------------------------------------------------------------------------
----
>>
>> WISPA Wireless List: wireless@wispa.org
>>
>> Subscribe/Unsubscribe:
>> http://lists.wispa.org/mailman/listinfo/wireless
>>
>> Archives: http://lists.wispa.org/pipermail/wireless/
>>
>>
>>
----------------------------------------------------------------------------
----
>> WISPA Wants You! Join today!
>> http://signup.wispa.org/
>>
----------------------------------------------------------------------------
----
>>
>> WISPA Wireless List: wireless@wispa.org
>>
>> Subscribe/Unsubscribe:
>> http://lists.wispa.org/mailman/listinfo/wireless
>>
>> Archives: http://lists.wispa.org/pipermail/wireless/
>>
>
>
>
----------------------------------------------------------------------------
----
> WISPA Wants You! Join today!
> http://signup.wispa.org/
>
----------------------------------------------------------------------------
----
>
> WISPA Wireless List: wireless@wispa.org
>
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
>
> Archives: http://lists.wispa.org/pipermail/wireless/
>


----------------------------------------------------------------------------
----
WISPA Wants You! Join today!
http://signup.wispa.org/
----------------------------------------------------------------------------
----
 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/



--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to