What will any radio do when it's channel gets jammed with noise.

On Sat, Jun 12, 2010 at 11:08 AM, Travis Johnson <t...@ida.net> wrote:

> Hi,
>
> I would still like to know what it's going to do when an entire
> polarization gets jammed with noise? Will the radio still pass traffic?
> Or will there be so many errors that it will overtake the link and
> nothing will work?
>
> Travis
> Microserv
>
> Tom DeReggi wrote:
> > I jsut wanted to mention, that it really does give peice of mind knowing
> > that there is a MIMO technology out there that I can count on, that is
> > inexpensive.
> > I just finished my 4th Ubiquiti PTP link (over last two weeks).  Once
> again,
> > Painless and perfect.
> > I got 38mb one way 22mb the other with 10Mhz Channel MCS 15.  And with
> 20Mhz
> > channel up to 69mbps one way, and 80 the other.
> > Link Quality nad Capacity showed like 96%.  LAtency was also down under
> 2ms.
> > But my point here is not the speed. It was that it was easy. I just put
> it
> > up, and it worked. Air view was helpful, finding channel. All 4 installs
> > worked that way. No hassle, no fuss.
> > This last one was a 15 mile link, Rocket5M on each side, with PACWireless
> > 2ft dish on one end and a 23 db panel on the other.
> > Nothing has ever been this easy.
> >
> > With that said.... There were some confusing things. I ran V on Chain0,
> and
> > H on Chain1 got -66, then for grins swapped conectors on CPE side only,
> so
> > Chain0 was H and Chain1 was V and got -65.
> > I do not understand why this happened. I would have thought signal should
> > have dropped by -20 db or so? Wierd. This did not just happen when in
> > Alignment mode. I may have been in MCS7 mode at the time though.
> > So it appears it must be transmitting on both pols in MCS7 mode, I dont
> have
> > any other way to explain it. But none the less, it just worked.
> >
> > I'm concern about using it at PtMP, because we use Station WDS, and AP
> only
> > supports up to 6 WDS clients. So it wont scale for PTMP Briding clients.
> > Unless that can be curred. But I tell you for PTP, or a couple
> associations,
> > its pretty sweet.
> >
> > (I still like T-Link-45s better when I only need 25-30mbps, but  the UBNT
> > has shown to be a wonderful experience, also.)
> >
> >
> > Tom DeReggi
> > RapidDSL & Wireless, Inc
> > IntAirNet- Fixed Wireless Broadband
> >
> >
> >
> >
> --------------------------------------------------------------------------------
> > WISPA Wants You! Join today!
> > http://signup.wispa.org/
> >
> --------------------------------------------------------------------------------
> >
> > WISPA Wireless List: wireless@wispa.org
> >
> > Subscribe/Unsubscribe:
> > http://lists.wispa.org/mailman/listinfo/wireless
> >
> > Archives: http://lists.wispa.org/pipermail/wireless/
> >
> >
>
>
>
> --------------------------------------------------------------------------------
> WISPA Wants You! Join today!
> http://signup.wispa.org/
>
> --------------------------------------------------------------------------------
>
> WISPA Wireless List: wireless@wispa.org
>
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
>
> Archives: http://lists.wispa.org/pipermail/wireless/
>


--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to