Hi,

During the upgrade process, did it give any errors? You did all 4 or 5 
files, correct? Have you tried doing them again and re-flashing each one 
as you go?

Travis


can...@believewireless.net wrote:
> 1. 17dBm / 17 dBm
> 2. Speed is the same on both sides.
> 3. (trango-view)# linktest 1
>         LOCK       RSSI          MSE            BER             TX
>          RX
>   1>     1      -41.10 dBm      -34.40 dB       0.00E+00        256QAM
>          256QAM
> (trango-view)#
>
>
> (trango-config)# linktest 1
>         LOCK       RSSI          MSE            BER             TX            
>  R
> X
>   1>     1      -38.30 dBm      -34.90 dB       0.00E+00        256QAM        
>  2
> 56QAM
>
>
> On Sun, Jun 27, 2010 at 12:32 AM, Travis Johnson <t...@ida.net> wrote:
>   
>> Did you check:
>>
>> (1) power level on each side
>> (2) speed settings (same modulation and channel size on each side)
>> (3) what does the linktest show on each side?
>>
>> Travis
>> Microserv
>>
>> can...@believewireless.net wrote:
>>     
>>> We can access the units via their IBM addresses but they won't pass
>>> traffic.  We have rebooted the radios, power cycled them, and nothing
>>> happens.
>>>
>>> Interestingly, the Mikrotik on one end of the link is showing up in
>>> the neighbor list.  So something is getting through.
>>>
>>>
>>>
>>> --------------------------------------------------------------------------------
>>> WISPA Wants You! Join today!
>>> http://signup.wispa.org/
>>>
>>> --------------------------------------------------------------------------------
>>>  WISPA Wireless List: wireless@wispa.org
>>>
>>> Subscribe/Unsubscribe:
>>> http://lists.wispa.org/mailman/listinfo/wireless
>>>
>>> Archives: http://lists.wispa.org/pipermail/wireless/
>>>
>>>
>>>       
>
>
> --------------------------------------------------------------------------------
> WISPA Wants You! Join today!
> http://signup.wispa.org/
> --------------------------------------------------------------------------------
>  
> WISPA Wireless List: wireless@wispa.org
>
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
>
> Archives: http://lists.wispa.org/pipermail/wireless/
>
>   


--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to