I'm in the Amazon and we have very intense lightning. We've never had a direct strike but we get very very close nearby strikes which induce high voltages into anything that can act like an antenna. We're running PS2's, NSM5's and a BulletM2. We lost some gear connected to the PS2's (though never a PS2 itself) before I isolated the PS2's from their mounts. The PS2's electronics have continuity to the mounting bracket. The gear was on a metal mount on a metal roof of a wooden house (roof not grounded) and the PS2 and it's associated ethernet cable were acting like a drain for the roof, zapping what was on the other end when ever lightning induced high voltage in the roof. Now I keep the PS2's isolated from their mount (with a piece of plastic tubing between the mount and PS2's bracket) and I have ethernet lightning protection at the POE end.
The NS5M's and the Bullet have been no problem. Greg On Jul 14, 2010, at 8:30 PM, Nick Olsen wrote: > I've noticed that the NSM2's do better then the NS2's. We've blown a few > NS2's, But never a NSM2, or any other radio in the M series now that I think > about it, If I recall correctly. And were in florida :D > > We had a tower take a hit, blew a power station or two and the tower switch, > all ubnt M devices were fine. > > Nick Olsen > Network Operations > (321) 205-1100 x106 > > > > > From: "Jim Patient" <sa...@jeffcosoho.com> > Sent: Wednesday, July 14, 2010 7:59 PM > To: "WISPA General List" <wireless@wispa.org> > Subject: Re: [WISPA] NS2 Ethernet issue > > Maybe it's my bad luck or I got a bad batch but I lost 4 last week:-( > > On 7/14/2010 6:44 PM, Josh Luthman wrote: > > --===============1574374465== > > Content-Type: multipart/alternative; boundary=001636163cc9511a71048b6192be > > > > --001636163cc9511a71048b6192be > > Content-Type: text/plain; charset=ISO-8859-1 > > > > I've had two NS2s go bad ever (been 9 months since I started using them). > > One doesn't turn on at all and the other one is unable to do Ethernet > > link/activity (powers on, wireless works). > > > > Josh Luthman > > Office: 937-552-2340 > > Direct: 937-552-2343 > > 1100 Wayne St > > Suite 1337 > > Troy, OH 45373 > > > > > > On Wed, Jul 14, 2010 at 7:35 PM, Jim Patient<sa...@jeffcosoho.com> wrote: > > > >> I have a box full of them that have the same issue. Ben told me to use > >> shielded cable for client installs. > >> Not that I haven't had a MT get hit a time or 2 but it seems every time I > >> see a cloud in the sky I loose an ns2. > >> Hopefully they'll get this fixed but for now I'm sticking with the $130 MT > >> CPE over the ns2. > >> > >> Jim > >> > >> > >> > >> On 7/14/2010 5:04 PM, Josh Luthman wrote: > >> > >> I had that a week or two ago. Michael asked me to just go ahead and RMA - > >> I did. > >> > >> Josh Luthman > >> Office: 937-552-2340 > >> Direct: 937-552-2343 > >> 1100 Wayne St > >> Suite 1337 > >> Troy, OH 45373 > >> > >> > >> On Wed, Jul 14, 2010 at 5:24 PM, Mark McElvy<mmce...@accubak.com> wrote: > >> > >>> Yes powered up and working fine from wireless side, no link on Ethernet > >>> > >>> Mark McElvy > >>> > >>> > >>> -----Original Message----- > >>> From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On > >>> Behalf Of Robert West > >>> Sent: Wednesday, July 14, 2010 4:14 PM > >>> To: 'WISPA General List' > >>> Subject: Re: [WISPA] NS2 Ethernet issue > >>> > >>> Is the unit still powering up from the POE ?? > >>> > >>> > >>> > >>> And you just can't talk to it????? > >>> > >>> > >>> > >>> > >>> > >>> > >>> > >>> From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On > >>> Behalf Of Mark McElvy > >>> Sent: Wednesday, July 14, 2010 5:11 PM > >>> To: wireless@wispa.org > >>> Subject: [WISPA] NS2 Ethernet issue > >>> > >>> > >>> > >>> Curious if other have seen issue with bad Ethernet ports on NS2's. I > >>> have a customer with a strange setup and he has blown the Ethernet port > >>> on 3 NS2's so far. Setup is a PS2/Client to the Internet on a 50ft mast > >>> on a hillside, Ethernet runs 150ft down a hill to power and is plugged > >>> into a NS2 in AP mode transmitting down the hill to the house where > >>> there is another NS2 as a client to the NS2 on the hill. The issue is > >>> with the AP/NS2 up the hill keeps blowing the Ethernet port. It is on a > >>> 10ft Ethernet cable and the LAN ports of the two POE's (NS2/AP and > >>> PS2/Client to the Internet) are connected together with a crossover. Any > >>> thoughts on why just this one radio would blow the ether port? > >>> > >>> > >>> > >>> Mark McElvy > >>> > >>> > >>> No virus found in this incoming message. > >>> Checked by AVG - www.avg.com > >>> Version: 9.0.830 / Virus Database: 271.1.1/2998 - Release Date: 07/14/10 > >>> 01:36:00 > >>> > >>> > >>> > >>> -------------------------------------------------------------------------------- > >>> WISPA Wants You! Join today! > >>> http://signup.wispa.org/ > >>> > >>> -------------------------------------------------------------------------------- > >>> > >>> WISPA Wireless List: wireless@wispa.org > >>> > >>> Subscribe/Unsubscribe: > >>> http://lists.wispa.org/mailman/listinfo/wireless > >>> > >>> Archives: http://lists.wispa.org/pipermail/wireless/ > >>> > >> > >> > >> > >> -------------------------------------------------------------------------------- > >> WISPA Wants You! Join today!http://signup.wispa.org/ > >> -------------------------------------------------------------------------------- > >> > >> WISPA Wireless List: wireless@wispa.org > >> > >> Subscribe/Unsubscribe:http://lists.wispa.org/mailman/listinfo/wireless > >> > >> Archives: http://lists.wispa.org/pipermail/wireless/ > >> > >> > >> > >> > >> > >> > >> -------------------------------------------------------------------------------- > >> WISPA Wants You! Join today! > >> http://signup.wispa.org/ > >> > >> -------------------------------------------------------------------------------- > >> > >> WISPA Wireless List: wireless@wispa.org > >> > >> Subscribe/Unsubscribe: > >> http://lists.wispa.org/mailman/listinfo/wireless > >> > >> Archives: http://lists.wispa.org/pipermail/wireless/ > >> > > --001636163cc9511a71048b6192be > > Content-Type: text/html; charset=ISO-8859-1 > > Content-Transfer-Encoding: quoted-printable > > > > I've had two NS2s go bad ever (been 9 months since I started using them= > > ).=A0 One doesn't turn on at all and the other one is unable to do Ethe= > > rnet link/activity (powers on, wireless works).<br><br clear=3D"all">Josh L= > > uthman<br> > > > > Office: 937-552-2340<br>Direct: 937-552-2343<br>1100 Wayne St<br>Suite 1337= > > <br>Troy, OH 45373<br> > > <br><br><div class=3D"gmail_quote">On Wed, Jul 14, 2010 at 7:35 PM, Jim Pat= > > ient<span dir=3D"ltr"><<a href=3D"mailto:sa...@jeffcosoho.com">sa...@je= > > ffcosoho.com</a>></span> wrote:<br><blockquote class=3D"gmail_quote" sty= > > le=3D"border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex;= > > padding-left: 1ex;"> > > > > > > > > =20 > > =20 > > =20 > > <div bgcolor=3D"#ffffff" text=3D"#000000"> > > I have a box full of them that have the same issue.=A0 Ben told me to > > use shielded cable for client installs.<br> > > Not that I haven't had a MT get hit a time or 2 but it seems every > > time I see a cloud in the sky I loose an ns2.<br> > > Hopefully they'll get this fixed but for now I'm sticking with = > > the > > $130 MT CPE over the ns2.=A0<br><font color=3D"#888888"> > > <br> > > Jim</font><div><div></div><div class=3D"h5"><br> > > <br> > > <br> > > On 7/14/2010 5:04 PM, Josh Luthman wrote: > > <blockquote type=3D"cite">I had that a week or two ago.=A0 Michael aske= > > d me to > > just go ahead and RMA - I did.<br> > > <br clear=3D"all"> > > Josh Luthman<br> > > Office: 937-552-2340<br> > > Direct: 937-552-2343<br> > > 1100 Wayne St<br> > > Suite 1337<br> > > Troy, OH 45373<br> > > <br> > > <br> > > <div class=3D"gmail_quote">On Wed, Jul 14, 2010 at 5:24 PM, Mark > > McElvy<span dir=3D"ltr"><<a href=3D"mailto:mmce...@accubak.com"= > > target=3D"_blank">mmce...@accubak.com</a>></span> > > wrote:<br> > > <blockquote class=3D"gmail_quote" style=3D"border-left: 1px solid r= > > gb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;"> > > Yes powered up and working fine from wireless side, no link on > > Ethernet<br> > > <br> > > Mark McElvy<br> > > <div><br> > > <br> > > -----Original Message-----<br> > > From:<a href=3D"mailto:wireless-boun...@wispa.org" target=3D"_= > > blank">wireless-boun...@wispa.org</a> > > [mailto:<a href=3D"mailto:wireless-boun...@wispa.org" target=3D= > > "_blank">wireless-boun...@wispa.org</a>] > > On<br> > > </div> > > <div>Behalf Of Robert West<br> > > Sent: Wednesday, July 14, 2010 4:14 PM<br> > > To:'WISPA General List'<br> > > Subject: Re: [WISPA] NS2 Ethernet issue<br> > > <br> > > Is the unit still powering up from the POE ??<br> > > <br> > > <br> > > <br> > > And you just can't talk to it?????<br> > > <br> > > <br> > > <br> > > <br> > > <br> > > <br> > > <br> > > From:<a href=3D"mailto:wireless-boun...@wispa.org" target=3D"_= > > blank">wireless-boun...@wispa.org</a> > > [mailto:<a href=3D"mailto:wireless-boun...@wispa.org" target=3D= > > "_blank">wireless-boun...@wispa.org</a>] > > On<br> > > Behalf Of Mark McElvy<br> > > Sent: Wednesday, July 14, 2010 5:11 PM<br> > > To:<a href=3D"mailto:wireless@wispa.org" target=3D"_blank">wir= > > el...@wispa.org</a><br> > > Subject: [WISPA] NS2 Ethernet issue<br> > > <br> > > <br> > > <br> > > </div> > > <div> > > <div>Curious if other have seen issue with bad > > Ethernet ports on NS2's. I<br> > > have a customer with a strange setup and he has blown the > > Ethernet port<br> > > on 3 NS2's so far. Setup is a PS2/Client to the Internet > > =A0on a 50ft mast<br> > > on a hillside, Ethernet runs 150ft down a hill to power > > and is plugged<br> > > into a NS2 in AP mode transmitting down the hill to the > > house where<br> > > there is another NS2 as a client to the NS2 on the hill. > > The issue is<br> > > with the AP/NS2 up the hill keeps blowing the Ethernet > > port. It is on a<br> > > 10ft Ethernet cable and the LAN ports of the two POE's > > (NS2/AP and<br> > > PS2/Client to the Internet) are connected together with a > > crossover. Any<br> > > thoughts on why just this one radio would blow the ether > > port?<br> > > <br> > > <br> > > <br> > > Mark McElvy<br> > > <br> > > <br> > > </div> > > </div> > > No virus found in this incoming message.<br> > > Checked by AVG -<a href=3D"http://www.avg.com" target=3D"_blank"= > >> www.avg.com</a><br> > > Version: 9.0.830 / Virus Database: 271.1.1/2998 - Release > > Date: 07/14/10<br> > > 01:36:00<br> > > <br> > > <br> > > ---------------------------------------------------------------------------= > > -----<br> > > WISPA Wants You! Join today!<br> > > <a href=3D"http://signup.wispa.org/" target=3D"_blank">http://sig= > > nup.wispa.org/</a><br> > > ---------------------------------------------------------------------------= > > -----<br> > > <br> > > WISPA Wireless List:<a href=3D"mailto:wireless@wispa.org" target= > > =3D"_blank">wireless@wispa.org</a><br> > > <br> > > Subscribe/Unsubscribe:<br> > > <a href=3D"http://lists.wispa.org/mailman/listinfo/wireless" targ= > > et=3D"_blank">http://lists.wispa.org/mailman/listinfo/wireless</a><br> > > <br> > > Archives:<a href=3D"http://lists.wispa.org/pipermail/wireless/" = > > target=3D"_blank">http://lists.wispa.org/pipermail/wireless/</a><br> > > </blockquote> > > </div> > > <br> > > <pre><fieldset></fieldset> > > > > > > ---------------------------------------------------------------------------= > > ----- > > WISPA Wants You! Join today! > > <a href=3D"http://signup.wispa.org/" target=3D"_blank">http://signup.wispa.= > > org/</a> > > ---------------------------------------------------------------------------= > > ----- > > =20 > > WISPA Wireless List:<a href=3D"mailto:wireless@wispa.org" target=3D"_blank= > > ">wireless@wispa.org</a> > > > > Subscribe/Unsubscribe: > > <a href=3D"http://lists.wispa.org/mailman/listinfo/wireless" target=3D"_bla= > > nk">http://lists.wispa.org/mailman/listinfo/wireless</a> > > > > Archives:<a href=3D"http://lists.wispa.org/pipermail/wireless/" target=3D"= > > _blank">http://lists.wispa.org/pipermail/wireless/</a></pre> > > </blockquote> > > <br> > > </div></div></div> > > > > <br><br> > > <br> > > ---------------------------------------------------------------------------= > > -----<br> > > WISPA Wants You! Join today!<br> > > <a href=3D"http://signup.wispa.org/" target=3D"_blank">http://signup.wispa.= > > org/</a><br> > > ---------------------------------------------------------------------------= > > -----<br> > > <br> > > WISPA Wireless List:<a href=3D"mailto:wireless@wispa.org">wirel...@wispa.o= > > rg</a><br> > > <br> > > Subscribe/Unsubscribe:<br> > > <a href=3D"http://lists.wispa.org/mailman/listinfo/wireless" target=3D"_bla= > > nk">http://lists.wispa.org/mailman/listinfo/wireless</a><br> > > <br> > > Archives:<a href=3D"http://lists.wispa.org/pipermail/wireless/" target=3D"= > > _blank">http://lists.wispa.org/pipermail/wireless/</a><br></blockquote></di= > > v><br> > > > > --001636163cc9511a71048b6192be-- > > > > --===============1574374465== > > Content-Type: text/plain; charset="us-ascii" > > MIME-Version: 1.0 > > Content-Transfer-Encoding: 7bit > > Content-Disposition: inline > > > > > > > > -------------------------------------------------------------------------------- > > WISPA Wants You! Join today! > > http://signup.wispa.org/ > > -------------------------------------------------------------------------------- > > > > WISPA Wireless List: wireless@wispa.org > > > > Subscribe/Unsubscribe: > > http://lists.wispa.org/mailman/listinfo/wireless > > > > Archives: http://lists.wispa.org/pipermail/wireless/ > > --===============1574374465==-- > > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/
-------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/