1. I do not think we are doing strain relief on the normal fiber, but on the armored we attached it to the tower with brackets every 4 feet or so. 2. We have done both. The non armored is easier to get to the fibers, but the armored can be attached directly to the tower. 3. The armored is attached directly to the tower, but the normal is in rigid conduit, until ~2 feet from the box at the top and then it is ~4 feet of flexible conduit 4. Normal fiber to Ethernet transceiver, the same we use at the bottom. We run AC up the tower to power our radios, fiber module(s), and router.
On Thu, Jul 15, 2010 at 3:07 PM, Justin Wilson <[email protected]> wrote: > This is a question for any of you running fiber up your towers. > > 1.How are you doing strain relief on the fiber? > 2.Do you run it in conduit or use the armored stuff and not worry about > conduit? > 3.If conduit. Is it flexible or rigid? > 4.What type of transceiver are you using at the top? > > Pics? Lessons learned? > > -- > Justin Wilson <[email protected]> > http://www.mtin.net/blog > Wisp Consulting – Tower Climbing – Network Support > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
