POS router. We always start with replacing them. We've had a slug of Linksys units start acting strange lately. Replacement fixes it up just fine. marlon
----- Original Message ----- From: "Scott Reed" <[email protected]> To: "WISPA General List" <[email protected]> Sent: Thursday, July 22, 2010 5:38 PM Subject: [WISPA] DHCP Question >I have a customer that has a RB411R as the CPE. It is running DHCP > server on the ethernet interface. > They have a Belkin 3129 SOHO router that gets its address from the RB. > At least once per day the router will drop its address and get a new > one. During this time the router and the customer's computers show the > Internet is down (the router has a red/green light on the front.) > I have replaced the radio and the POE-24i the powers it. I thought > maybe the Cat5 was kinked at the CPE end so I replace the RJ45. > What am I missing that would cause a device to request a DHCP address? > > -- > Scott Reed > Sr. Systems Engineer > GAB Midwest > 1-800-363-1544 x2241 > 1-260-827-2241 > Cell: 260-273-7239 > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
