Hello All, I just set up a new POP for base station. This base station has the tallest tower mast of about 100 meters. I installed two APs- bullet M5 with 90 degrees base station antenna each. Each facing different directions.
I have about 15 customers I want to migrate to the new base station. The farthest customer to the base station is about 3 km from the APs. I planned installing Loco M5 for closer clients and NS M5 for farther clients. I installed Loco M5 for three close customers of about less than 1 km to the base station. Every other customer is about 1km and above and installing Loco M5 has not been successful with them also, I tried NS M5 in one of the locations(about 2 km away from the AP)but no success. A total speed test of 36Mbps from customer location with rx of about 10 Mbps and tx of 26Mbps. May I request for you technical support. I still plan to install more and completely migrate all my clients to ubiquity products. -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
