Anyone who can help, We have 3-5 users that cannot access the internet via Canopy 9000 SMC's w/ 17 dB Yagi, ss600 surge,
When config'd to freq. & Color Code, same firmware version as AP - AP does not "see" the radio, radio does not see tower AP. Go to 'tools' in SM, alignment mode, and we have -60 to -70 dBm on all radios, spectrum analyzer shows a good signal across the 924 MHz channel. Switch off the alignment mode and 'SA', 'go back to 'status' and there is only the 107 to 108 RSSI. One site I have changed out the entire installation, been good for four years, the same result. Rural area, 1-5 miles separation between sites, happening on two (2) different 9000 APC's. Customers are unhappy, I am stumped. Does anyone know the answer to the problem? A suggestion, anything? Ron Wallace Hahnron, Inc. 220 S. Jackson Dt. Addison, MI 49220 Phone: (517)547-8410 Mobile: (517)270-2410 e-mail: [email protected] [email protected]
-------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
