You could do thru the window if possible ? Or.. use the UBNT Loco's... and turn the power down all the way down. (Loco or LocoM and your favorite frequency )
plus if the signal is too hot, then you can tilt them to face the ground... Regards. Faisal Imtiaz Snappy Internet & Telecom On 8/30/2010 1:29 PM, Jason Hensley wrote: > Wall shot is not workable either. These are old buildings that 2.4 does > not penetrate at all (and 900 is out of the question) – we’ve already > tried because the cable runs are just a real big pain!! > > *From:* [email protected] [mailto:[email protected]] > *On Behalf Of *Chuck Profito > *Sent:* Monday, August 30, 2010 12:24 PM > *To:* 'WISPA General List' > *Subject:* Re: [WISPA] Close range radio recommendation > > Then you have to have two, client and ap . if you are only going thru > say one wall, how about a single ruckus, the packman one. > > *From:* [email protected] [mailto:[email protected]] > *On Behalf Of *Mike Hammett > *Sent:* Monday, August 30, 2010 10:06 AM > *To:* WISPA General List > *Subject:* Re: [WISPA] Close range radio recommendation > > The Nanos have a hard time adjusting power down that far, though. > > > > ----- > > Mike Hammett > > Intelligent Computing Solutions > > http://www.ics-il.com > > > > > On 8/30/2010 11:38 AM, RickG wrote: > > You didnt mention if clear LOS or not. If so, Nanostation2. > > On Mon, Aug 30, 2010 at 11:48 AM, Jason Hensley <[email protected] > <mailto:[email protected]>> wrote: > > Need something that will go a very short distance (less than 150’) with > power that’s able to adjust down to where it doesn’t burn up radios. Has > to mount outside, and no, there’s no way to run Ethernet or fiber in > this situation. Bandwidth is not that big of a deal – 3-6meg will be > more than enough. Need only for VoIP traffic between two buildings. > > Thanks! > > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: [email protected] <mailto:[email protected]> > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > > > > > > -------------------------------------------------------------------------------- > > WISPA Wants You! Join today! > > http://signup.wispa.org/ > > -------------------------------------------------------------------------------- > > > > WISPA Wireless List:[email protected] <mailto:[email protected]> > > > > Subscribe/Unsubscribe: > > http://lists.wispa.org/mailman/listinfo/wireless > > > > Archives:http://lists.wispa.org/pipermail/wireless/ > > > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
