I've already got UBNT stuff in production, and I know without a doubt it won't handle 100m full duplex - especially at 25 miles.
Might be possible to do parallel links or something, but that would require some kind of load failover system at each end, since no way will it do 100 m one way, if there's any backward traffic. What Proxim stuff? ++++++++++++++++++++++++++++++ Neofast, Inc, Making internet easy 541-969-8200 509-386-4589 ++++++++++++++++++++++++++++++ -------------------------------------------------- From: "Josh Luthman" <[email protected]> Sent: Monday, August 30, 2010 4:22 PM To: "WISPA General List" <[email protected]> Subject: Re: [WISPA] Suggestions for high bandwidth @ 25 miles. > Proxim, Ubiquiti M... > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > > > On Mon, Aug 30, 2010 at 7:18 PM, MDK <[email protected]> wrote: >> Assuming that spectrum (frequencies open) is not a problem, what would >> you >> use in the 5 ghz range to reach 25 miles? Want to do full duplex 100 M >> ethernet connection. >> >> >> >> >> ++++++++++++++++++++++++++++++ >> Neofast, Inc, Making internet easy >> 541-969-8200 509-386-4589 >> ++++++++++++++++++++++++++++++ >> >> -------------------------------------------------- >> From: "Paolo Di Francesco" <[email protected]> >> Sent: Monday, August 30, 2010 1:50 PM >> To: "WISPA General List" <[email protected]> >> Subject: [WISPA] (DIRECTLY) Connecting two wireless with a RF cable >> >>> Hi all >>> >>> I was wondering if directly connecting two wireless cards would burn >>> them. The point is not the power sent by the two cards, but if the >>> impedance is not the right one. >>> >>> Indeed in the "normal use" with the antenna the impedance is not the >>> same of using a direct cable from one card to another. Not sure what >>> impedance the "RX" card would show to the "TX" card >>> >>> Any idea? I am quite curious. Anybody using this configuration in daily >>> installations? >>> >>> Thank you >>> >>> >>> -- >>> >>> >>> Ing. Paolo Di Francesco >>> >>> Teleinform s.r.l. >>> Sede Legale: Via Francesco Paolo Di Blasi 1, 90144 Palermo >>> Unita' Operativa: Via Regione Siciliana 49, 90046 Monreale (Palermo) >>> Tel: +39-091-6408576, +39-091-6404501 >>> Fax: +39-091-6406200 >>> >>> http://www.wikitel.it >>> http://www.teleinform.com >>> >>> >>> >>> >>> >>> -------------------------------------------------------------------------------- >>> WISPA Wants You! Join today! >>> http://signup.wispa.org/ >>> -------------------------------------------------------------------------------- >>> >>> WISPA Wireless List: [email protected] >>> >>> Subscribe/Unsubscribe: >>> http://lists.wispa.org/mailman/listinfo/wireless >>> >>> Archives: http://lists.wispa.org/pipermail/wireless/ >> >> >> >> -------------------------------------------------------------------------------- >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> -------------------------------------------------------------------------------- >> >> WISPA Wireless List: [email protected] >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
