Run the AP and SM in WDS mode. the radios do some funny things with ARP with it off.
- Jerry -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Greg Ihnen Sent: Thursday, September 09, 2010 7:44 AM To: WISPA General List Subject: [WISPA] NS2Loco ARP table strangeness I posted this to the UBNT list and haven't gotten a hit yet. I have an NS2L serving as an AP plugged into a MT 750. It's acting strangely (wireless clients stay connected but periodically lose connectivity so I started looking around. In the ARP table I found this: IP Address MAC address Interface 192.168.7.2 00:25:00:49:E5:6B BRIDGE 24.56.178.140 00:00:00:00:00:00 BRIDGE The network is 192.168.7.0/24. The MT doesn't show the 24.56.178.140 address, nor does any of the other equipment on the network. A reboot doesn't clear the 24.56.178.140 address from the arp table. The MT's connections list doesn't show 24.56.178.140. Anyone have any ideas? -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
