The concrete in question is actually a landing strip so is plenty
strong/thick enough. As we would normally cement in the rods that the
tower is mounted onto, I need to know how it would be done when the
concrete is already there. Anyone doing this or is it just not the way
to go?

 

  _____  

From: Robert West [mailto:robert.w...@just-micro.com] 
Sent: 18 September 2010 23:38
To: 'WISPA General List'
Subject: Re: [WISPA] Tower Footings

 

I would want to know the concrete strength, if it had rebar in it and
how deep and wide it goes.  As well if they are belled out.  I’m all for
saving a bunch of bucks but gotta make sure you stay within specs for
the new tower.  Also, bolting onto the old foundation, go deep!  

 

Bob-

 

 

 

From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Paul Hendry
Sent: Saturday, September 18, 2010 12:07 PM
To: wireless
Subject: [WISPA] Tower Footings

 

Hi all, 

 

            We have a 12m VersaTower that we are looking to install but
where it needs installing there is already a very solid concrete
foundations. We have only ever installed a tower by digging fresh
foundations and was wondering if anyone knows of an acceptable techniche
for mounting directly onto existing foundations or if this is just not a
very good idea at all. 

 

Many thanks, 

  

Paul Hendry 

Technical Director 

 

Skyline Networks & Consultancy Ltd 

Unit 6C - Woodside Commercial Estate, 

Woodside, 

Thornwood, 

Epping, 

Essex 

CM16 6LJ 

  

Tel: 0845 004 0404 

Mob: 0783 492 1803 

Email: paul.hen...@skyline-networks.com 

Web: http://www.skyline-networks.com 

 

 

  

  

This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom it is
addressed.  If you have received this email in error please notify the
sender.  Whilst every endeavour is taken to ensure that emails are free
from viruses, no liability can be accepted for any damage arising from
using this email. 

 


-- 
This message has been scanned for viruses and 
dangerous content by MailScanner, and is 
believed to be clean. 



--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to